gaussian splatting - 2026_07
Navigation
Home / Papers / gaussian splatting
- Part 1
- Part 2
Papers
Wireless aerial virtual reality (VR) aims to provide immersive access to large-scale scenes, but high-resolution view generation and delivery are jointly constrained by limited bandwidth, latency, and power. 3D Gaussian Splatting (3DGS) can reduce the payload by rendering views from compact pose information, yet its geometry errors may cause severe VR quality degradation. Existing channel-aware or pixel-level resource allocation schemes fail to capture such geometry-sensitive distortion. To address this issue, this paper proposes GeoFovea-GS as a geometry-aware cross-layer framework for communication-efficient wireless aerial VR. A foveated geometry-aware distortion metric is developed to characterize photometric rendering error, geometric inconsistency, and view-dependent perceptual importance in a unified form. Based on this metric, the joint selection of pose-only 3DGS rendering and image/tile correction transmission is formulated as a cross-layer optimization problem under wireless constraints. A lightweight value-of-information scheduler is further developed to allocate communication resources to regions that are both geometry-critical and perceptually important. Experiments on real-world 3DGS scenes demonstrate that GeoFovea-GS achieves superior immersive rendering quality with substantially reduced transmission cost.
Recent 4D Gaussian Splatting (4DGS) methods often fail under fast motion with large inter-frame displacements, where Gaussian attributes are poorly learned during training, and fast-moving objects are often lost from the reconstruction. In this work, we introduce Spatiotemporal Position Implicit Network for 4DGS, coined SPIN-4DGS, which learns Gaussian attributes from explicitly collected spatiotemporal positions rather than modeling temporal displacements, thereby enabling more faithful splatting under fast motions with large inter-frame displacements. To avoid the heavy memory overhead of explicitly optimizing attributes across all spatiotemporal positions, we instead predict them with a lightweight feed-forward network trained under a rasterization-based reconstruction loss. Consequently, SPIN-4DGS learns shared representations across Gaussians, effectively capturing spatiotemporal consistency and enabling stable high-quality Gaussian splatting even under challenging motions. Across extensive experiments, SPIN-4DGS consistently achieves higher fidelity under large displacements, with clear improvements in PSNR and SSIM on challenging sports scenes from the CMU Panoptic dataset. For example, SPIN-4DGS notably outperforms the strongest baseline, D3DGS, by achieving +1.83 higher PSNR on the Basketball scene.
We present ABot-3DWorld 0, a universal multimodal 3D world model that turns text, image, and video inputs into high-fidelity, explorable 3D worlds. At the heart of our framework is a unified Spatial Generative Primitive (SGP), a compact tuple of a high-quality panorama and a spatial point cloud that delivers an efficient description of any 3D space. Multimodal inputs are first lifted into this primitive; a 3D-consistent panoramic video generator then explores the primitive along a planned trajectory; finally, our panoramic video reconstruction engine converts the generated video into a clean, photorealistic 3D Gaussian Splatting (3DGS) world. This pipeline covers two regimes: rich inputs (multi-view sets, casual video) are lifted into the SGP through a geometry-rigorous recovery that mirrors the observed scene, while a single image or sentence is completed generatively into a creative world. The result is one low-barrier engine for general 3D content creation that further anchors generated worlds to geographic points of interest, enabling map-native spatial exploration at consumer scale. Experiments show that ABot-3DWorld 0 sets the state of the art among open-source methods and demonstrates stronger scene fidelity than Marble under rich multimodal inputs.
Recent advances in 3D Gaussian Splatting (3DGS) have enabled Simultaneous Localization and Mapping (SLAM) systems to build photorealistic maps. However, these maps lack the open-vocabulary semantic understanding required for robotic interaction. Integrating language features into SLAM remains a significant challenge, as storing high-dimensional features incurs excessive memory and rendering overhead, while existing methods with static models lack adaptability for novel environments. We propose LEGO-SLAM (Language-Embedded Gaussian Optimization SLAM), a framework that achieves real-time, open-vocabulary mapping within a 3DGS-based SLAM system. At the core of our method is a scene-adaptive autoencoder that distills high-dimensional language embeddings into a compact 16-dimensional feature space, reducing the memory per Gaussian and accelerating rendering. Unlike static approaches, our encoder adapts online to unseen scenes. These compact features also enable a language-guided pruning strategy that identifies semantic redundancy, reducing the map's Gaussian count by up to 58% while maintaining rendering quality. Furthermore, we introduce a language-based loop detection approach that reuses the language features already extracted for mapping, eliminating the need for a separate detection model. Experiments demonstrate that LEGO-SLAM achieves competitive mapping quality and tracking accuracy, all while providing open-vocabulary capabilities at 15 FPS. Our project page is available at https://lab-of-ai-and-robotics.github.io/LEGO-SLAM/
We propose Scene-specific Ambiguity-aware 3D Language Fields (SaaF), a novel Gaussian Splatting-based 3D language field designed for interactive object retrieval in a given real-world scene. Interactive object retrieval using natural language is a crucial capability for service robots operating in complex real-world environments. While recent 3D language field methods for object retrieval establish associations between rendered pixels and autoencoder-compressed CLIP features, they suffer from two limitations: (1) reduced discriminability among similar objects due to feature compression, and (2) poor handling of ambiguous queries, often resulting in unstable or incorrect retrieval. To address these limitations, SaaF introduces a metric learning strategy to construct a unified feature space that is both instance-discriminative and ambiguity-aware. (i) To enhance instance-level visual discrimination, SaaF employs metric learning that pulls image features from multiple viewpoints of the same object closer together in the feature space. (ii) To establish ambiguity awareness, the model jointly trains on multiple text labels generated by the proposed method from each tracked object image sequence, including ambiguous descriptions, to learn the semantic relationships between ambiguous and specific features in a target scene. This feature space enables fine-grained visual understanding while allowing the system to estimate query ambiguity and interactively request clarification when needed. Experimental results demonstrate that SaaF not only improves retrieval accuracy over previous methods but also robustly detects and handles ambiguity in the user text queries under open-vocabulary settings.
Object-level 3D reconstruction play important roles across domains such as cultural heritage digitization, industrial manufacturing, and virtual reality. However, existing Gaussian Splatting-based approaches generally rely on full-scene reconstruction, in which substantial redundant background information is introduced, leading to increased computational and storage overhead. To address this limitation, we propose an efficient single-object 3D reconstruction method based on 2D Gaussian Splatting. By directly integrating foreground-background probability cues into Gaussian primitives and dynamically pruning low-probability Gaussians during training, the proposed method fundamentally focuses on an object of interest and improves the memory and computational efficiency. Our pipeline leverages probability masks generated by YOLO and SAM to supervise probabilistic Gaussian attributes, replacing binary masks with continuous probability values to mitigate boundary ambiguity. Additionally, we propose a dual-stage filtering strategy for training's startup to suppress background Gaussians. And, during training, rendered probability masks are conversely employed to refine supervision and enhance boundary consistency across views. Experiments conducted on the MIP-360, T&T, and NVOS datasets demonstrate that our method exhibits strong self-correction capability in the presence of mask errors and achieves reconstruction quality comparable to standard 3DGS approaches, while requiring only approximately 1/10 of their Gaussian amount. These results validate the efficiency and robustness of our method for single-object reconstruction and highlight its potential for applications requiring both high fidelity and computational efficiency.
Vision-Language Models (VLMs) have demonstrated strong reasoning capabilities over images and videos, yet their application to embodied scene understanding often constrained by the fixed viewpoints stored in episodic RGB-D memories. These observations may fail to capture query-relevant evidence due to occlusions, object truncation, restricted fields of view, or suboptimal view composition. We present SplatReasoner, a framework that introduces novel view synthesis into the VLM reasoning process by leveraging 3D Gaussian Splatting (3DGS). Given a user query about a 3D scene, SplatReasoner retrieves relevant observations and synthesizes query-conditioned viewpoints that reveal the visual evidence needed to answer the query and ground the referred entities in 3D. Experiments show that query-conditioned novel view synthesis improves both embodied reasoning and 3D grounding over fixed-view memory and language-embedded 3DGS baselines.
Gaussian Splatting has emerged as an effective representation for video, but existing methods rely on per-video optimization. This leads to slow encoding and limits generalization across videos. To amortize this optimization, we propose HyperGS, a feedforward, optimization-free approach that directly predicts Gaussian representations from any video in a single forward pass, speeding up encoding and decoding by orders of magnitude while generalizing to out-of-distribution videos at higher resolutions. In HyperGS, we design a factorized spatiotemporal Transformer to extract tokens from video, and a learnable query-based Transformer to obtain 8-parameter Gaussian representations for each video frame. We find that naively predicting Gaussians across diverse videos induces a needle-like degeneration that collapses training, and address this with a rank-based geometric regularizer whose strength adapts dynamically to stabilize optimization. HyperGS achieves encoding at $10^4$--$10^5\times$ the speed of per-video Gaussian optimization at matched reconstruction quality while generalizing zero-shot to $720p$ video, enabling higher-resolution rendering without re-encoding. HyperGS improves PSNR by +2.9--3.1 dB over the prior video encoders on K400, SSv2, and UCF101 at a smaller video representation size. By predicting explicit 2D Gaussians in a single forward pass, HyperGS combines the fast, flexible rendering of Gaussian Splatting with the speed and generalization of feedforward prediction, advancing Gaussians as a practical direction for fast and generalizable video representation.
Long-tail hazardous scenarios are essential for safety-oriented autonomous driving, yet they are difficult to collect and reproduce at scale. Editable 3D Gaussian Splatting (3DGS) simulation offers a promising alternative by reconstructing real driving scenes and supporting controllable scene editing. However, edited 3DGS-rendered videos still suffer from a significant Sim-to-Real gap, including rendering artifacts, degraded foreground assets, inconsistent illumination, and temporal flickering. Existing restoration and video generation methods are insufficient for this task, as they often fail to jointly repair 3DGS-specific artifacts, improve visual realism, and ensure temporal consistency. To fill this gap, we propose RealityBridge, a structure-preserving and asset-aware Sim-to-Real framework for edited 3DGS driving videos. RealityBridge uses multimodal controls, including rendered videos, foreground masks, edge maps, and semantic masks, together with a lightweight GateNet for adaptive condition allocation across backbone layers. We further construct targeted training data and introduce autoregressive long-video training with reward-guided post-training to improve restoration quality, temporal stability, and hallucination suppression. Extensive experiments on internal and public driving datasets show that RealityBridge outperforms existing methods in artifact removal, illumination harmonization, and long-sequence temporal consistency.
Drone-view geo-localization (DVGL) aims to determine the location of drones in GPS-denied environments by retrieving the corresponding geotagged satellite tile from a reference gallery given UAV observations of a location. In many existing formulations, these observations are represented by a single oblique UAV image. In contrast, our satellite-free setting is designed for multi-view UAV sequences, which are used to construct a geometry-normalized UAV-side location representation before cross-view retrieval. Existing approaches rely on satellite imagery during training, either through paired supervision or unsupervised alignment, which limits practical deployment when satellite data are unavailable or restricted. In this paper, we propose a satellite-free training (SFT) framework that converts drone imagery into cross-view compatible representations through three main stages: drone-side 3D scene reconstruction, geometry-based pseudo-orthophoto generation, and satellite-free feature aggregation for retrieval. Specifically, we first reconstruct dense 3D scenes from multi-view drone images using 3D Gaussian splatting and project the reconstructed geometry into pseudo-orthophotos via PCA-guided orthographic projection. This rendering stage operates directly on reconstructed scene geometry without requiring camera parameters at rendering time. Next, we refine these orthophotos with lightweight geometry-guided inpainting to obtain texture-complete drone-side views. Finally, we extract DINOv3 patch features from the generated orthophotos, learn a Fisher vector aggregation model solely from drone data, and reuse it at test time to encode satellite tiles for cross-view retrieval. Experimental results on University-1652 and SUES-200 show that our SFT framework substantially outperforms satellite-free generalization baselines and narrows the gap to methods trained with satellite imagery.
SLAM methods based on 3D Gaussian Splatting (3DGS) have demonstrated impressive tracking and mapping performance, but typically require additional geometric information from external depth sensors. Meanwhile, recent SLAM systems that leverage geometric priors from pre-trained feed-forward models enable real-time dense reconstruction, yet often discard original RGB information during optimization, thus degrading overall reconstruction quality. We present GeoGS-SLAM, an online monocular dense reconstruction system that combines the 3DGS-based map representation with learned geometric priors. Given uncalibrated RGB input, we first employ a feed-forward visual geometry model to predict camera and scene priors. The Gaussian scene map is then expanded by directly sampling Gaussian primitives from both RGB input and geometric priors. Camera poses and the scene map are jointly optimized through a coarse-to-fine strategy that minimizes both photometric and geometric losses. To ensure global consistency, we further incorporate online loop closure detection and pose graph optimization. Extensive experiments across indoor and outdoor benchmarks demonstrate that GeoGS-SLAM achieves superior rendering quality and tracking accuracy compared to state-of-the-art methods while maintaining online real-time performance. Project page: https://rlgao.github.io/geogs_slam.
Dynamic scene reconstruction remains challenging due to the heterogeneous and spatially varying nature of real-world motion. Although recent 3D Gaussian Splatting methods have introduced diverse deformation formulations for dynamic novel view synthesis, each method typically relies on a single deformation model within its representation, which limits robustness across diverse dynamic scenarios. In this work, we study a fundamental problem-multi-deformation modeling for dynamic 3D Gaussian representations-under two distinct integration constraints that differ in when and how multiple deformation experts interact during training. From a Mixture-of-Experts (MoE) perspective, we view multi-deformation modeling as the problem of combining multiple specialized deformation models within a unified 3D representation. We first introduce Mixture of Deformation Experts (MoDE), which integrates multiple deformation experts directly into the deformable Gaussian Splatting pipeline through joint optimization. In MoDE, experts operate on a shared canonical Gaussian representation, enabling multi-deformation modeling without introducing additional training stages or modifying the original optimization schedule. In contrast, we further present Mixture of Experts for Dynamic Gaussian Splatting (MoE-GS) under a different integration constraint, where deformation experts are optimized independently and combined through a separate routing stage. As a result, expert interaction occurs over non-canonical Gaussian representations after individual optimization. Together, these two approaches provide alternative strategies for multi-deformation modeling, clarifying how integration constraints shape the design and behavior of deformation experts in dynamic 3D Gaussian representations. Our code is available at: https://github.com/cvsp-lab/MoE-GS-studio.
Recent generalizable 3D Gaussian Splatting models have advanced long-sequence novel view synthesis (NVS), but at the cost of substantial redundant computation. We identify that the redundancy can be mitigated based on two observations: (i) high-precision geometry is not strictly required for high-quality NVS; (ii) appearance learning is generally easier than geometry recovery. Motivated by these insights, we propose an asymmetric architecture that decouples geometry and appearance modeling. The geometry branch processes coarse-grained tokens with most of the parameters for multi-view reconstruction, while the appearance branch operates on fine-grained tokens to capture details using significantly fewer parameters. The two branches interact through bilateral connections, enabling mutual guidance for their respective tasks. This task-aware asymmetry reduces the computational redundancy and allocates the computation more judiciously, thereby increasing parameter efficiency and enabling smaller models to achieve strong performance. On 32-view 960P inputs, our model matches optimization-based methods while delivering nearly 800x speedup, and surpasses the zero-shot performance of state-of-the-art generalizable models with markedly fewer parameters and reduced training/inference overhead, achieving an overall efficiency improvement.
Reactive control can gracefully coordinate the motion of the base and the arm of a mobile manipulator. However, incorporating an accurate representation of the environment to avoid obstacles without involving costly planning remains a challenge. In this work, we present ReMoSPLAT, a reactive controller based on a quadratic program formulation for mobile manipulation that leverages a Gaussian Splat representation for collision avoidance. By integrating additional constraints and costs into the optimisation formulation, a mobile manipulator platform can reach its intended end effector pose while avoiding obstacles, even in cluttered scenes. We investigate the trade-offs of two methods for efficiently calculating robot-obstacle distances, comparing a purely geometric approach with a rasterisation-based approach. Our simulation experiments on both synthetic and real-world scans demonstrate the feasibility of the proposed method, achieving performance comparable to controllers that rely on perfect ground-truth information. We further validate the approach on a real robot platform more details: https://remosplat.github.io
3D Gaussian Splatting represents scenes as finite mixtures of anisotropic Gaussians whose number of components $K$ is set by heuristic density control or user caps. Variational Bayes Gaussian Splatting (VBGS) recast splat fitting as conjugate variational inference, but $K$ remains fixed. We replace the finite symmetric Dirichlet over mixture weights with a truncated stick-breaking Dirichlet-process prior -- and, as a theory-backed alternative, a sparse overfitted finite Dirichlet -- so that the number of occupied components adapts to the data while every update remains a closed-form coordinate-ascent step; a natural-gradient stochastic variant makes the per-step cost independent of the number of points. We give an exact monotonicity guarantee, a rigorous truncation-error bound correcting an anti-conservative large-$α$ approximation in common use, and an honest account of what the fitted number of components estimates. Empirically: (i) the effective complexity $\hat{K}$ adapts to scene complexity and recovers the true $K$ within $\pm 1$ on well-separated synthetic data with regime-appropriate concentration; (ii) a deconfounded comparison shows the DP prior's contribution is complexity selection, not per-component efficiency -- converged DP fits exceed single-pass fixed-$K$ VBGS by +2.7 dB at matched budgets yet tie an equally converged fixed-$K$ baseline, and on 3D scenes DP-Splat matches or exceeds VBGS's held-out color prediction with 5.9-7.6x fewer components; (iii) the posterior-predictive color variance is well calibrated on model-matched synthetic data; and (iv) the ordering suggested by exact-posterior asymptotics reverses under mean-field coordinate ascent: the DP prior resists over-splitting while the sparse finite mixture saturates its truncation, a gap between variational practice and posterior asymptotics documented across three orders of magnitude in $N$.
Recently, several studies have combined Gaussian Splatting to obtain scene representations with language embeddings for open-vocabulary 3D scene understanding. While these methods perform well, they essentially require very dense multi-view inputs, limiting their applicability in real-world scenarios. In this work, we propose SparseLGS to address the challenge of 3D scene understanding with pose-free and sparse view input images. Our method leverages a learning-based dense stereo model to handle pose-free and sparse inputs, and a three-step region matching approach to address the multi-view semantic inconsistency problem, which is especially important for sparse inputs. Different from directly learning high-dimensional CLIP features, we extract low-dimensional information and build bijections to avoid excessive learning and storage costs. We introduce a reconstruction loss during semantic training to improve Gaussian positions and shapes. To the best of our knowledge, we are the first to address the 3D semantic field problem with sparse pose-free inputs. Experimental results show that SparseLGS achieves comparable quality when reconstructing semantic fields with fewer inputs (3-4 views) compared to previous SOTA methods with dense input. Besides, when using the same sparse input, SparseLGS leads significantly in quality and heavily improves the computation speed (5$\times$speedup). Project page: https://ustc3dv.github.io/SparseLGS
Reconstructing high-fidelity 3D scenes from sparse-views remains a central problem in generalizable neural rendering. Existing generalizable 3D Gaussian Splatting (3DGS) methods often exhibit geometric artifacts in sparse-view settings, since supervision based solely on 2D photometric losses cannot resolve depth and correspondence ambiguities. To address this issue, we propose MAC-Splat, a training framework built around direct 3D consistency supervision. MAC-Splat builds on the MASt3R geometric backbone and a frozen DINOv3 encoder to obtain semantically informed 2D correspondences, which serve as geometric anchors for 3D supervision. Using these anchors, we define the Multi-Attribute Consistency (MAC) loss. This objective jointly regularizes the 3D attributes of matched Gaussians, including their position, shape, and appearance, by enforcing agreement in a common world coordinate frame. The formulation is robust to outliers and respects the geometry of covariance matrices, which leads to stable training under sparse-view conditions. Experiments on ScanNet++ show that MAC-Splat outperforms strong baselines, with particularly large gains under different overlap regimes. In particular, it improves average PSNR over Splatt3R by more than 4.5 dB, reduces LPIPS, and maintains performance as the camera pose gap increases. These results indicate that a direct, multi-attribute 3D consistency objective, when combined with high-quality correspondences, is effective for addressing the ill-posed sparse-view reconstruction problem.
Incremental scene reconstruction is essential for real-world applications. Although 3D Gaussian Splatting shows strong potential, most existing approaches require offline conversion of the optimized Gaussians into an intermediate implicit field for explicit mesh extraction, which hinders seamless integration with downstream tasks. To address this limitation, we propose a novel online framework that incrementally reconstructs and updates high-fidelity explicit meshes by directly triangulating a dense geometric Gaussian representation, which supports both high-quality rendering and incremental surface reconstruction. Moreover, we present a direct meshing algorithm that efficiently extracts and updates the mesh from the Gaussian set. To ensure mesh accuracy, we enforce a plane-based pulling constraint that dynamically aligns 3D Gaussian primitives to the approximated local surface. Furthermore, our framework significantly reduces memory and computational overhead during long-sequence processing by dynamically freezing fully optimized historical regions. Experiments on public datasets demonstrate that our method outperforms conventional Gaussian-based methods on both rendering quality and reconstruction accuracy.
We introduce Grassmannian splatting, a dynamic scene representation whose primitives are Gaussians supported on 3-planes in spacetime $\R^4$: generically, spatial 2-planes in uniform translation along their normals. Each primitive carries a unit normal $n \in \mathbb S^3/\{\pm 1\} \cong \mathrm{Gr}(3,4)$ and an unconstrained factor $L \in \mathbb R^{4 \times 3}$, with covariance \[ Σ_{4\mathrm{D}} = (P_n L)(P_n L)^T, \qquad P_n = I - n n^T. \] For generic $L$ and $n \neq \pm e_0$, conditioning on time returns a rank-2 surfel at every frame. The normal of the disk and its velocity along that normal are read off from $n$; the disk shape and the tangential drift of its center are set by $L$. Existing native 4D Gaussian splatting methods [\it{Yang et. al. 2023,Duan et. al. 2024}] slice full-rank spacetime covariances, so their per-frame primitive is a volumetric ellipsoid; since conditioning lowers rank by exactly one, a rank-2 surfel in the slice requires a rank-3 spacetime covariance, and the parameterization above realizes exactly these. The motion model is closed form, i.e. no deformation field is learned, and no custom CUDA is required: the conditioned disk feeds a standard 3DGS rasterizer through its precomputed-covariance interface. A soft clamp in the Schur denominator regularizes the static orientation and continuously bridges rank-3 static and rank-2 dynamic behavior, so static and moving primitives form a single continuous family. On the 17 HyperNeRF scenes of MonoDyGauBench, training is fastest among all compared methods (4.9 to 5.6 times faster than the strongest quality baselines), while ranking second in PSNR, MS-SSIM, and LPIPS. Code: https://github.com/PaulCelanCoding/grassmannian-splatting
Open-vocabulary 3D scene understanding is commonly achieved by embedding 2D vision-language features such as CLIP into a 3D Gaussian Splatting scene, turning it into a text-queryable semantic field. However, attaching a high-dimensional feature to each of millions of Gaussians inflates a single scene to gigabytes, which makes storage and deployment the real bottleneck of these fields. Existing compact methods each learn and ship a per-scene codec, an autoencoder, a quantized codebook, or a distilled feature field, entangling field construction with field storage and never compressing the per-Gaussian assignment that holds the bulk of the cost. We argue that construction and storage should be decoupled, and that storage is a rate-distortion problem over the per-Gaussian binding to a small anchor table, a structure no prior open-vocabulary method compresses. We present CoSAG, which constructs the field without any per-scene training through a closed-form transmittance-weighted lift, spatially grounded semantic anchors, and multi-view denoising, and stores it with a spatially predictive entropy coder that ships no decoder. Because the anchors are spatially grounded, the binding is predictable and therefore highly compressible. The transmittance-weighted lift and multi-view denoising yield a clean, view-consistent assignment, so the entropy coder spends almost no rate on correcting noise and instead codes only the residual against its spatial prediction. CoSAG reaches sub-megabyte storage while matching or exceeding the state of the art across the 2D-rendered, 3D-selection, and dense-LSeg protocols, reducing field size by 37 to 76x relative to LangSplatV2 at higher accuracy.
We present SyncSpace, a system that achieves both spatial alignment and visual consistency between a generated 3DGS world and physical space. We first scan the space via depth sensing to extract 3D bounding boxes, which we render into a layout-only panorama and feed as a geometric prior to a generative world model, producing a Gaussian splat scene in which objects are re-semantized to fit a target style without per-object control. We then align the generated scene to physical space with a coarse-to-fine registration algorithm, refined manually via pinch gestures when automatic registration does not converge. We demonstrate a hand-tracked engulfment interaction in which the virtual world rises to replace the physical space, and show a single space reskinned into multiple stylistically distinct worlds with its layout preserved.
Teleoperating remotely operated vehicles (ROVs) in flooded, cluttered infrastructure is fundamentally limited by narrow 2D egocentric views and subsea communication latency. We present a multimodal teleoperation architecture built on a ROS-Unity framework that decouples proactive spatial planning from reactive boundary avoidance. The system replaces static camera feeds with a Dynamic Adaptive Viewpoint System (DAVS), which uses continuous optimization and real-time 3D Gaussian Splatting (3DGS) to synthesize an occlusion-free exocentric viewpoint from onboard state estimation. To further reduce sensory workload, a torso-mounted vibrotactile suit maps local obstacle clearance to intuitive haptic proximity cues. The architecture was evaluated in a controlled human-subject study (N = 30) using a BlueROV2 navigating a complex simulated underwater facility. A 3 x 4 repeated-measures design compared three interaction modalities (Egocentric, Haptic, Exocentric) under four communication delays (0.0-1.0 s). Performance was quantified using behavioral measures and functional near-infrared spectroscopy (fNIRS) to assess task-evoked prefrontal activation. Results show that reactive haptic feedback improves path adherence under minimal delay, whereas the 3DGS-driven exocentric visualization provides superior resilience under severe latency (0.5-1.0 s), significantly outperforming the other modalities. fNIRS further revealed a cognitive disengagement effect: increasing latency during conventional egocentric teleoperation overloaded working memory and reduced prefrontal activation, whereas the proactive spatial context provided by DAVS sustained executive control. These findings demonstrate that spatially grounded, multimodal assistance can substantially improve operator performance and cognitive endurance during latency-degraded underwater teleoperation.
We present a novel integrated architecture for robust online 3D Gaussian splatting, real-time VR exploration, and speech-driven Vision-Language-Model interaction. Unlike methods assuming clean depth or external poses, our system combines ORB-SLAM3-based pose estimation with online Gaussian reconstruction for noisy real-world data. A VR pipeline enables immersive exploration of incremental reconstructions; a semantic module transcribes voice commands, generates scene descriptions, and records points of interest. Against state-of-the-art online Gaussian splatting methods, we improve image quality on our dataset (+14.5% PSNR, +8.6% SSIM, -14.3% LPIPS) and TUM-RGBD (+11.7% PSNR, +7.8% SSIM, -21.6% LPIPS), with comparable or superior frame rates via quality-speed configurations. We achieve an 88% VLM object-recognition rate.
Recent advances in 3D Gaussian Splatting have enabled impressive photorealistic novel view synthesis. However, to transition from a pure rendering engine to a reliable spatial map for autonomous agents and safety-critical applications, knowing where the representation is uncertain is as important as the rendering fidelity itself. We bridge this critical gap by introducing a lightweight, plug-and-play framework for pixel-wise, view-dependent predictive uncertainty estimation. Our post-hoc method formulates uncertainty as a Bayesian-regularized linear least-squares optimization over reconstruction residuals. This architecture-agnostic approach extracts a per-primitive uncertainty channel without modifying the underlying scene representation or degrading baseline visual fidelity. Crucially, we demonstrate that providing this actionable reliability signal successfully translates 3D Gaussian splatting into a trustworthy spatial map, further improving state-of-the-art performance across three critical downstream perception tasks: active view selection, pose-agnostic scene change detection, and pose-agnostic anomaly detection.
Scaling 3D Gaussian Splatting (3DGS) to large outdoor scenes is costly in both data acquisition and computation. Adopting panoramic images with equirectangular projection (ERP) can reduce capture effort via their full $360^{\circ}$ field of view, yet the resulting omnipresent visibility invalidates existing partitioning strategies that rely on local camera frustums, causing block-wise optimization to degenerate into global training. Thus, we propose PanoLOG, a two-stage coarse-to-fine framework equipped with a Geometry and Gradient-based Partitioning Strategy tailored for large-scale panoramic 3DGS reconstruction. In the global coarse stage, PanoLOG leverages sky-sphere modeling and panoramic monocular depth supervision for reliable geometry, while in the refinement stage, G$^2$PS builds adaptive bounding volumes via parallax-driven uncertainty and assigns cameras via gradient-based importance scoring. Furthermore, we construct Pano360, the first benchmark on large-scale panoramic dataset for outdoor scene reconstruction. Extensive experiments demonstrate that G$^2$PS achieves state-of-the-art rendering quality while maintaining scalable, block-parallel training. Our models, training code, and dataset are publicly available.
Primitive-based methods such as 3D Gaussian Splatting have recently become the state-of-the-art for novel-view synthesis and related reconstruction tasks. Compared to neural fields, these representations are more flexible, adaptive, and scale better to large scenes. However, the limited expressivity of individual primitives makes modeling high-frequency detail challenging. We introduce Neural Harmonic Textures, a neural representation approach that anchors latent feature vectors on a virtual scaffold surrounding each primitive. These features are interpolated within the primitive at ray intersection points. Inspired by Fourier analysis, we apply periodic activations to the interpolated features, turning alpha blending into a weighted sum of harmonic components. The resulting signal is then decoded in a single deferred pass using a small neural network, significantly reducing computational cost. Neural Harmonic Textures yield state-of-the-art results in real-time novel view synthesis while bridging the gap between primitive- and neural-field-based reconstruction. Our method integrates seamlessly into existing primitive-based pipelines such as 3DGUT, Triangle Splatting, and 2DGS. We further demonstrate its generality with applications to 2D image fitting and semantic reconstruction.
Recent advancements in open-vocabulary 3D scene understanding heavily rely on 3D Gaussian Splatting (3DGS) to register vision-language features into 3D space. However, we identify two critical limitations in these approaches: the spatial ambiguity arising from unstructured, overlapping Gaussians which necessitates probabilistic feature registration, and the multi-level semantic ambiguity caused by pooling features over object-level masks, which dilutes fine-grained details. To address these challenges, we present a novel framework that leverages Sparse Voxel Rasterization (SVRaster) as a structured, disjoint geometry representation. By regularizing SVRaster with monocular depth and normal priors, we establish a stable geometric foundation. This enables a deterministic, confidence-aware feature registration process and suppresses the semantic bleeding artifact common in 3DGS. Furthermore, we resolve multi-level ambiguity by exploiting the emerging dense alignment properties of the AM-RADIO foundation model, avoiding the computational overhead of hierarchical training methods. Our approach achieves state-of-the-art performance on Open Vocabulary Point Cloud Understanding, and highly competitive results on 3D and 2D Object Retrieval benchmarks.
Gaussian splatting is the current state-of-the-art for dense, deformable 3D anatomy reconstruction in robot-assisted minimally invasive surgery (RAMIS); however, most pipelines are offline and depend on accurate camera trajectory priors (often from robotic kinematics), limiting applicability when priors are missing or noisy. To address these limitations, we propose Track2Map, an online 3D Gaussian Splatting pipeline that jointly optimizes camera trajectory and 3D deformable scene representation directly from surgical video. Track2Map is therefore capable of robust 3D reconstructions when camera trajectory priors are either absent or noisy, and due to its online nature it effectively works as a Simultaneous Localisation and Mapping (SLAM) method. To stabilize optimization in the presence of tissue motion and ambiguous visual cues, we introduce a track-anchored deformation initialization using dense 2D point tracks. Track statistics are further utilized to disentangle camera motion from scene deformation by detecting static camera periods and reducing drift during incremental mapping. Experiments on StereoMIS show improved reconstruction quality and camera trajectory against competing SLAM methods, as well as compared to non-SLAM methods that utilize camera trajectory priors. The code is available at https://track2map.github.io/.
High-fidelity surface reconstruction from multi-view images is a core problem in 3D computer vision. While neural implicit surfaces like SDFs offer smooth geometry, they are often bottlenecked by the computational intensity of volume rendering. Conversely, 3D Gaussian Splatting (3DGS) provides rapid training but lacks geometry continuity, often leading to fragmented surfaces. This paper presents a novel framework that integrates Signed Distance Fields directly into the splatting pipeline. By leveraging the continuous nature of SDFs to regularize Gaussian primitives, our method effectively fills geometric holes and suppresses noise inherent in sparse point clouds. Unlike hybrid approaches that rely on heavy volumetric sampling, our approach utilizes the efficiency of splatting to achieve faster convergence. Extensive evaluations demonstrate that our method produces high-quality surfaces with significantly fewer primitives, offering a more compact and efficient representation for both indoor and outdoor environments.
Dynamic scene reconstruction remains challenging due to the heterogeneous and spatially varying nature of real-world motion. Although recent 3D Gaussian Splatting methods have introduced diverse deformation formulations for dynamic novel view synthesis, each method typically relies on a single deformation model within its representation, which limits robustness across diverse dynamic scenarios. In this work, we study a fundamental problem-multi-deformation modeling for dynamic 3D Gaussian representations-under two distinct integration constraints that differ in when and how multiple deformation experts interact during training. From a Mixture-of-Experts (MoE) perspective, we view multi-deformation modeling as the problem of combining multiple specialized deformation models within a unified 3D representation. We first introduce Mixture of Deformation Experts (MoDE), which integrates multiple deformation experts directly into the deformable Gaussian Splatting pipeline through joint optimization. In MoDE, experts operate on a shared canonical Gaussian representation, enabling multi-deformation modeling without introducing additional training stages or modifying the original optimization schedule. In contrast, we further present Mixture of Experts for Dynamic Gaussian Splatting (MoE-GS) under a different integration constraint, where deformation experts are optimized independently and combined through a separate routing stage. As a result, expert interaction occurs over non-canonical Gaussian representations after individual optimization. Together, these two approaches provide alternative strategies for multi-deformation modeling, clarifying how integration constraints shape the design and behavior of deformation experts in dynamic 3D Gaussian representations. Our code is available at: https://github.com/cvsp-lab/MoE-GS-studio.
This paper proposes an effective Gaussian management framework for high-fidelity scene reconstruction of both appearance and geometry. Unlike recent Gaussian Splatting (GS) pipelines that treat all primitives uniformly during optimization, our framework explicitly manages the attribute activation, representation and pruning of Gaussian. Specifically, our framework first introduces GauSep, a novel densification strategy that selectively activates Gaussian color or normal attributes to alleviate destructive gradient conflicts arising from dual supervision. We further propose GauRep, an adaptive Gaussian representation that dynamically adjusts spherical harmonics (SHs) orders and performs task-decoupled pruning to reduce redundancy at both the individual and global levels. To provide reliable geometric supervision for above mangement process, we additionally introduce CoRe, an regularized surface reconstruction module that distills robust normal fields from an SDF branch to the Gaussian representation through a confidence mechanism. Notably, the proposed Gaussian management is compatible with various reconstruction architectures and can be seamlessly integrated to improve performance while reducing size of the model. Extensive experiments demonstrate that our approach achieves superior or comparable performance in appearance and geometry reconstruction compared with state-of-the-art methods, while using significantly fewer parameters.
Robotic manipulators excel in structured environments but face substantial challenges in unstructured and dynamic settings. This paper presents SplatCtrl, a unified framework for real-time scene reconstruction and reactive robot motion generation to enable collision-free robotic arm control in previously unseen and continuously changing environments. Building on 3D Gaussian Splatting (3D-GS), we introduce a hybrid voxel-based filtering and dynamic Gaussian relocation strategy that supports efficient scene reconstruction from RGB-D streams while accommodating environmental changes. For safe and reactive control, we further propose a method for deriving continuous signed distance functions from isotropic Gaussians, providing stable and differentiable collision probability estimates that bridge classical distance fields with the modern implicit representation. These continuous distance metrics are incorporated into control barrier functions, resulting in a unified perception-action coupling framework that supports smooth and reliable real-time motion generation in response to scene changes. Experimental validation in simulation, on physical robot, and within shared human-robot workspace demonstrates the framework's effectiveness, achieving integrated scene reconstruction and reactive control in uncertain, and dynamic environments.
Recent advances in 3D Gaussian Splatting (3DGS) have enabled high-quality, render-ready scene representations for novel-view synthesis. However, most existing 3DGS pipelines rely on multi-view observations (or non-causal access to future frames) to achieve sufficient coverage, which is often unavailable in on-device robotics and AR settings where sensing is restricted to a single stereo rig. Recovering a high-quality 3DGS scene from one stereo observation, therefore, remains challenging due to occlusions, limited field of view, and missing geometry. We present StereoSplat+, a diffusion-enhanced feed-forward framework that enables causal reconstruction from a single stereo pair. Our method builds on two key components. First, we propose StereoSplat, an input-invariant feed-forward 3D Gaussian estimator that takes a variable number of posed stereo pairs as input and predicts high-quality 3D Gaussians. StereoSplat fuses complementary geometry cues via a cost-volume branch and a triplane-based 3D volume branch and leverages continuous pose encoding to generalize across view counts and camera configurations. Second, since multiple posed stereo pairs are typically unavailable at inference time, we introduce a diffusion-enhanced one-shot progressive inference scheme called StereoSplat+: starting from one stereo pair, we render novel stereo views from the predicted 3DGS, refine them with a one-step diffusion enhancer, and feed them back as additional inputs to update the 3DGS. Experiments on the KITTI-360 dataset show that StereoSplat+ improves novel-view rendering quality and geometry accuracy, especially in occluded regions and under strong view extrapolation, outperforming recent feed-forward 3DGS baselines.
Dense visual SLAM is a fundamental problem in robotics. Recent advances in 3DGS have demonstrated its potential for dense SLAM. Existing 3DGS frameworks focus on both appearance and geometry modeling. However, scene geometry is typically more critical for SLAM than novel view synthesis because downstream robotic tasks, such as navigation and obstacle avoidance, rely primarily on accurate spatial geometry rather than photorealistic rendering. This observation raises a natural question: Is it feasible for 3DGS to perform 3D reconstruction without scene appearance modeling? Motivated by this, we propose Geometry-only Gaussian Splatting (GeoGS), which directly reconstructs scene geometry, and further present GeoGS-SLAM, a dense visual SLAM system built upon this representation. Specifically, GeoGS retains only spatial parameters to reduce the number of per-primitive parameters by over 80%. In contrast to existing 3DGS methods, GeoGS focuses solely on geometric reconstruction, which significantly reduces the number of Gaussian primitives, accelerates geometric convergence, and enhances robustness to illumination variations. In addition, we present an effective training framework that optimizes the Gaussian primitives via single-view and multi-view geometric and photometric supervision, and speeds up geometry convergence with a local-plane driven initialization that better aligns primitives with local structures. Furthermore, we introduce a map update strategy for loop closure that globally transforms the Gaussian map to align it with the corrected pose estimates, thereby preventing map tearing caused by inconsistent per-viewpoint pose corrections in existing methods. Extensive experiments on synthetic and real-world benchmarks demonstrate that our method outperforms SOTA methods in terms of online mapping efficiency and geometric reconstruction quality.
Pose-Free Feed-forward 3D Gaussian Splatting (3DGS) has recently emerged as a powerful paradigm for fast scene reconstruction. However, its performance degrades significantly in long image sequences due to cumulative camera pose estimation drift, which propagates errors into geometric modeling and severely limits rendering fidelity. In this work, we revisit the long-sequence bottleneck and identify pose drift as the primary factor restricting reconstruction quality. Furthermore, while SfM-based pseudo ground-truth poses introduce sensor noise, purely rendering-based supervision often leads to optimization instability and local minima due to the entangled optimization of geometry and pose. To address the challenges, we propose a synergistic pose-free framework that explicitly couples geometry and appearance via a Raymap-Guided Coupling Module (RGC). Concretely, we anchor Gaussian centers to raymap-induced geometry and jointly optimize RGB reconstruction, raymap consistency, and camera regularization under a unified objective, yielding a bidirectional feedback loop: stronger geometry improves rendering, and appearance supervision in turn refines geometry and pose. To further stabilize learning across wide temporal ranges, we introduce a Dual-Frequency Viewpoint Scheduling strategy that combines easy-to-hard interval expansion with replay of short-interval pairs. Extensive experiments across in-domain and cross-domain datasets show consistent gains in both rendering and pose estimation, with notably improved robustness on long sequences. Ablation studies validate our central insight: explicitly designed geometry-appearance synergy is the key to scalable and drift-robust pose-free feed-forward 3D reconstruction.
GP-4DGS: Probabilistic 4D Gaussian Splatting from Monocular Video via Variational Gaussian Processes
We present GP-4DGS, a novel framework that integrates Gaussian Processes (GPs) into 4D Gaussian Splatting (4DGS) for principled probabilistic modeling of dynamic scenes. While existing 4DGS methods focus on deterministic reconstruction, they are inherently limited in capturing motion ambiguity and lack mechanisms to assess prediction reliability. By leveraging the kernel-based probabilistic nature of GPs, our approach introduces three key capabilities: (i) uncertainty quantification for motion predictions, (ii) motion estimation for unobserved or sparsely sampled regions, and (iii) temporal extrapolation beyond observed training frames. To scale GPs to the large number of Gaussian primitives in 4DGS, we design spatio-temporal kernels that capture the correlation structure of deformation fields and adopt variational Gaussian Processes with inducing points for tractable inference. Our experiments show that GP-4DGS enhances reconstruction quality while providing reliable uncertainty estimates that effectively identify regions of high motion ambiguity. By addressing these challenges, our work takes a meaningful step toward bridging probabilistic modeling and neural graphics.
Immersive 360-degree educational environments often lack accessible spatial structure, limiting visually impaired learners' ability to orient, explore, and construct mental representations. This paper proposes EscFOA, a geometry-aware spatial audio generation framework designed as an \emph{acoustic scaffolding} to support spatial cognition. By integrating 3D Gaussian Splatting (3DGS) with conditional diffusion models, EscFOA reconstructs scene geometry from 360-degree videos to synthesize high-fidelity spatial audio consistent with the environmental structure. Explicitly targeting learning outcomes like independent spatial orientation and reduced cognitive load, EscFOA significantly outperforms conventional monaural and stereo audio in supporting spatial learning behaviors among blindfolded sighted participants (simulating visually impaired learners). These findings demonstrate that geometry-consistent generative audio can effectively enable inclusive access to complex spatial learning materials.
Recovering real-world scenes as interactive simulation environments can enable generalizable robot learning and reproducible policy evaluation. However, constructing scenes that are both physically stable and visually faithful remains slow and expensive. In this work, we present RoboSnap, a real-to-sim framework that turns a single RGB image into a simulation-ready scene. The key idea is a layered design that separates the physics-critical interaction area from the surrounding visual context: collision-aware foreground assets are refined for stable robot interaction, while a 3D Gaussian splatting visual layer preserves faithful background appearance under novel views. Experiments on DROID scenes and real-robot tasks show that RoboSnap achieves reliable trajectory replay in the recovered scenes, supports task-specific synthetic data generation for policy training, and yields meaningful sim-real correlation for policy evaluation. To further support real-to-sim research, we introduce DROID-Sim, a real-to-sim companion dataset constructed from 564 real-world scenes in DROID. Extensive experiments suggest that the value of real-to-sim methods lies not only in high-fidelity visual reconstruction, but in turning real environments into reusable infrastructure for robot learning and evaluation.
Magnetic resonance imaging (MRI) super-resolution is vital for improving diagnostic accessibility, yet most methods treat it as a deterministic mapping from a fixed low-resolution input to a high-resolution target. This overlooks a key property of MRI acquisition physics: spatial resolution and signal-to-noise ratio (SNR) are inherently coupled, making any given low-resolution scan merely one of many possible realizations under varying acquisition trade-offs. We rethink MRI super-resolution as a physics-aware reconstruction problem, in which the goal is to identify the optimal resolution-SNR configuration and then super-resolve it to obtain high-quality MRI results. A key implication of this formulation is that MRI resolution becomes dynamic rather than fixed. To handle such resolution-heterogeneous inputs, we adapt 2D Gaussian Splatting (2D GS) to MRI by formulating reconstruction as a coordinate-based, resolution-agnostic rendering problem. To further enhance fidelity, we introduce three innovations: (1) a prior-aware Gaussian representation that combines an Anatomical Structure Prior for tissue-specific kernel initialization with an Imaging System Prior that captures hardware characteristics via a covariance dictionary; (2) a physics-constrained signal modeling scheme that predicts intrinsic tissue parameters (proton density rho and effective relaxation rate R2) and synthesizes intensities through governing physical equations, ensuring biophysically plausible contrast; and (3) a meta-learning framework that alleviates paired-data scarcity by pretraining on simulated data and adapting to real-world conditions. Extensive experiments on dynamic-resolution datasets and standard benchmarks demonstrate that our method achieves state-of-the-art performance, highlighting its strong potential for clinical deployment.
Challenges remain in ego-centric 3D scene generation due to limited view overlap and the dominant influence of individual perspectives on scene interpretation. These factors hinder the creation of viewpoint-consistent and semantically aligned visual content, as well as the construction of accurate geometric structures. In this paper, we propose CGGS, a text-to-3D framework aiming to enhance 3D-content-awareness and address geometric distortions in ego-centric scene generation. Firstly, the Ego-centric Generator is proposed by fine-tuning a Multi-View Latent Diffusion Model with consistency-augmented loss to generate consistent, high-fidelity 2D content aligned with textual descriptions. Then, Layout Decorator leverages optical flow and point-track correspondence to estimate depth, therefore producing dense point clouds as coarse layouts from the ego-centric 2D priors. Building on this initialization, Geometric Refiner is proposed to enhance 3D Gaussian reconstruction via an entropy-based Mutual Information Depth Loss (MID) combined with a hierarchical optimization scheme for improving visual quality and geometric structure. Comprehensive experiments demonstrate that CGGS outperforms previous methods in generating coherent and accurate text-driven 3D scenes. Project page: [https://cggs-26.github.io/cggs26/](https://cggs-26.github.io/cggs26/).
3D Gaussian Splatting provides an explicit representation that jointly models geometry and appearance, serving as a scalable foundation for 3D representation learning. Existing pre-training methods for Gaussian representations, such as masked Gaussian reconstruction, primarily capture local structures but offer limited semantic supervision. In this paper, we propose GaussFusion, a multimodal pre-training framework for 3D Gaussian representations. GaussFusion integrates image and text supervision into masked Gaussian modeling through cross-modal semantic alignment, enabling the Gaussian encoder to learn both visual and language-level semantic information during pre-training. To better adapt masked modeling to the non-uniform distribution of Gaussian primitives, we further propose Gaussian Salience-guided Multi-scale Hole Masking (GSHM). GSHM constructs spatially continuous masked regions based on Gaussian salience. By applying hole masks at multiple scales, GSHM encourages the encoder to capture both fine-grained local patterns and broader structural dependencies. Extensive experiments on downstream tasks demonstrate that GaussFusion improves the transferability of Gaussian representations. Notably, GaussFusion outperforms Gaussian-MAE on ModelNet40 and ScanObjectNN (PB-T50-RS) by 0.61\% and 3.85\%, respectively.
Novel View Synthesis (NVS) methods, such as 3D Gaussian Splatting (3DGS), rely heavily on the assumption of clean, multi-view consistent, posed input images. Real-world captures can violate this assumption due to screen-space artifacts-static occlusions fixed to the 2D image plane rather than to the 3D world. Common examples include physical sensor defects, environmental obstructions (such as rain or mud on the lens enclosure), capture obstructions (such as a thumb over the camera sensor or a dashboard visible in dashcam footage), and digital overlays (such as watermarks or UI elements). When present, they are erroneously baked into the 3D geometry as "floaters" or near-camera artifacts, degrading the quality of novel-view rendering. In this work, we propose SSA-3DGS, an unsupervised framework that jointly optimizes a 3D scene and a learnable 2D overlay to recover a clean 3D scene and the corrupting artifacts. By exploiting geometric consensus across views, our method effectively disentangles static artifacts from the 3D scene geometry without supervision or manual input. Across diverse synthetic corruptions and a self-captured real-world dataset, SSA-3DGS improves reconstruction fidelity by up to 9 dB PSNR over 3DGS trained on the same corrupted inputs, while faithfully preserving the corrupting artifact.
3D Gaussian splatting (3DGS) is a strong representation for real-time novel-view synthesis, but its standard training pipeline relies on point estimates and hand-tuned heuristics, providing no native uncertainty or principled complexity control. This is most limiting under sparse views or fixed acquisition budgets, where a model must identify weakly supported geometry and select informative views. We introduce a rendering-aware Bayesian 3DGS framework that tracks Gaussian geometry with a Normal-Inverse-Wishart posterior over means and covariances using renderer-derived surrogate summaries. An optional Dirichlet-process extension adds a probabilistic component-usage signal, and the training schedule makes the closed-form versus approximate inference boundary explicit. Re-rendering posterior geometry samples yields native predictive uncertainty for interval calibration and active view selection. In a fixed-budget 16-to-32 active-view task, native NIW acquisition improves PSNR by +0.453 dB and LPIPS by -0.0146 over a scoring-only 3-member standard-ensemble baseline, winning 29/39 scene-seed pairs and 10/13 scene means; it also improves over PPU-style (+0.355 dB) and NIW-proxy (+0.401 dB) acquisition. NIW native intervals reduce 95% coverage error by about 17x relative to a shared proxy (0.046 vs. 0.796) and are about 10x closer to nominal coverage than a 3-member deep ensemble (0.047 vs. 0.454) at roughly one-third the training cost. As a reconstruction compatibility check, paired NIW-vs-standard analysis over 39 scene-seed runs yields +0.030 dB PSNR with 1.6% additional training time. These results position Bayesian 3DGS as a practical probabilistic scene representation for decision-facing tasks such as active view selection.
While feedforward 3D reconstruction excels at efficient novel view synthesis, it typically falters when faced with scenes under varying illumination. To this end, we introduce WildSplat, the first feedforward 3D Gaussian Splatting framework capable of appearance-conditioned novel-view synthesis for unposed in-the-wild images. To handle inconsistent photometric conditions, we propose a dual-branch architecture that explicitly decouples geometry from appearance. The geometry branch extracts an appearance-invariant 3D structure and jointly predicts camera poses. To govern the rendering appearance, the appearance branch injects target appearance cues into the content features via a globally pre-modulated cross-attention mechanism. To further prevent feature entanglement, we introduce a joint multi-reference training strategy that stabilizes the training process. Extensive experiments show that WildSplat surpasses existing optimization-based and feedforward methods, achieving state-of-the-art performance in in-the-wild novel view synthesis and appearance editing from sparse inputs in a single forward pass.
3D Gaussian Splatting has demonstrated remarkable potential in novel view synthesis. In contrast to small-scale scenes, large-scale scenes inevitably contain sparsely observed regions with excessively sparse initial points. In this case, supervising Gaussians initialized from low-frequency sparse points with high-frequency images often induces uncontrolled densification and redundant primitives, degrading both efficiency and quality. Intuitively, this issue can be mitigated with scheduling strategies, which can be categorized into two paradigms: modulating target signal frequency via densification and modulating sampling frequency via image resolution. However, previous scheduling strategies are primarily hardcoded, failing to perceive the convergence behavior of scene frequency. To address this, we reframe the scene reconstruction problem from the perspective of signal structure recovery and propose SIG, a novel scheduler that synchronizes image supervision with Gaussian frequencies. Specifically, we derive the average sampling frequency and bandwidth of 3D representations, and then regulate the training image resolution and the Gaussian densification process based on scene frequency convergence. Furthermore, we introduce Sphere-Constrained Gaussians, which leverage the spatial prior of initialized point clouds to control Gaussian optimization. Our framework enables frequency-consistent, geometry-aware, and floater-free training, achieving state-of-the-art performance by a substantial margin in both efficiency and rendering quality in large-scale scenes. The code is available at: https://github.com/weiyixue999/Signal_Structure_Aware_Gaussian
Reconstructing dynamic human-scene environments from monocular videos is a challenging problem that requires jointly modeling scene geometry, camera motion, and non-rigid human dynamics while enabling photorealistic rendering. Recent feed-forward methods can efficiently predict geometry, but they are often limited to non-photorealistic representations such as point clouds and meshes, or they fail to handle non-rigid objects, particularly dynamic humans. To fill this gap, we present GUSH3R (Gaussian-Unified Scene Human 3D Reconstruction), a feed-forward framework for online dynamic human-scene reconstruction. From a monocular human-scene video, our method reconstructs dynamic humans (everyone) and static scenes (everywhere) in a single forward pass (all at once) as 3D Gaussian Splatting (3DGS) primitives (as gaussians), which are geometrically consistent and capable of novel view synthesis. Experiments on monocular human-scene datasets demonstrate that our approach achieves competitive novel view synthesis quality while significantly improving inference efficiency compared to optimization-based methods.
3D Gaussians have become a powerful scene representation for real-time splatting and high-quality novel-view synthesis. This has motivated generalizable splatting -- methods that adapt feed-forward geometry prediction networks to produce per-pixel Gaussians from a set of images. However, most generalizable splatting pipelines are supervised primarily through a view-synthesis loss to predict Gaussian orientation, anisotropic scale, opacity, and appearance in addition to their locations. We show that this learning objective is under-constrained. Models trained with view synthesis alone produce splats whose orientations and scales have no geometric connotation. The result is that, while producing decent view-synthesis performance, nearly all generalizable splatting methods produce geometrically inaccurate and misaligned Gaussians. We introduce G3Splat, a geometry-consistent generalizable splatting framework that addresses these degeneracies through differentiable geometric priors on the predicted 3D Gaussians, making the learning problem well-posed. These priors encourage the per-pixel splats to remain on their viewing rays and to orient themselves in accordance with local surfaces. Our priors are architecture-agnostic and can be incorporated into any previously studied geometric backbone for generalizable splatting, as well as different scene representations. We test G3Splat with both DUSt3R-style and VGGT-style backbones to predict pixel-aligned full-rank 3DGS as well as surfel-like 2DGS. Trained on RE10K, G3Splat produces Gaussian splats with significantly higher geometric fidelity than baselines, providing state-of-the-art novel-view depth, mesh reconstruction, and relative pose estimation performance while preserving novel-view synthesis quality, as evaluated on datasets such as ACID and ScanNet. Code and pretrained models are released on our project page.
Simulation-based testing enables safe and repeatable evaluation of autonomous driving systems, but its effectiveness is limited by the gap between synthetic simulator outputs and real-world camera observations. To address this problem, we present Cam2Sim, a tool that transforms real-world driving recordings into playable CARLA simulation scenarios. Starting from camera images and poses, Cam2Sim reconstructs road geometry, ego trajectories, parked vehicles, and simulation assets, and augments the reconstructed environment with Gaussian Splatting to render camera observations that resemble the original recording. The framework supports ROS-based data extraction, parked-vehicle detection, OpenStreetMap-based map generation, CARLA scenario construction, Gaussian Splatting training, trajectory replay, and closed-loop execution with a system under test. We validate Cam2Sim on a real-world urban-driving scenario with a camera-based end-to-end driving model, comparing reconstruction quality, image-generation quality, and closed-loop behavior against both a simulation-only baseline and the real-world target. Results show that Gaussian-Splatting-based rendering reduces the visual gap with respect to standard simulator rendering and improves behavioral similarity to the real-world reference runs. The artifact is publicly available at https: //github.com/ast-fortiss-tum/cam2sim, and a screencast showing the tool is available at https://youtu.be/KmZ74l1__lI
Real-time, text-promptable 4D reconstruction is indispensable for autonomous surgical interaction. Severe misalignment between semantic meaning and physical anatomy still persists, largely because existing solutions integrate Vision-Language Models into deformable fields via a rigid coupling scheme that tightly binds semantic features to geometric warping. In this paper, we propose DeGenseGS, Geometrically and Semantically Decoupled Surgical Scene Understanding in 4D Gaussian Splatting, a novel framework that independently models semantic evolution and geometric deformation. Specifically, we propose a HexPlane-based spatiotemporal entanglement module that uses shared kinematic latents to synchronize semantic mutations with scene dynamics, while explicitly disentangling semantic updates from geometric deformation. To further ensure robustness against reconstruction artifacts, we devise a Rasterization-Native Semantic Extraction mechanism that infers semantics from topologically continuous feature maps. Additionally, we incorporate an angular-aligned optimization strategy that conforms to the native hyperspherical latent space, thereby preventing semantic distortion. Extensive evaluations on the CholecSeg8k and EndoVis18 datasets demonstrate that DeGenseGS achieves state-of-the-art performance. Our framework yields enhanced geometric completeness and robust semantic-anatomic alignment, enabling spatially continuous segmentation despite drastic tissue deformation and topological transitions.
Advances in radiance fields have enabled photorealistic novel view synthesis. In several domains, large-scale real-world datasets have been developed to support comprehensive benchmarking and to facilitate progress beyond scene-specific reconstruction. However, for distractor-free radiance fields, a large-scale dataset with clean and cluttered images per scene remains lacking, limiting the development. To address this gap, we introduce DF3DV-1K, a large-scale real-world dataset comprising 1,048 scenes, each providing clean and cluttered image sets for benchmarking. In total, the dataset contains 89,924 images captured using consumer cameras to mimic casual capture, spanning 128 distractor types and 161 scene themes across indoor and outdoor environments. A curated subset of 41 scenes, DF3DV-41, is systematically designed to evaluate the robustness of distractor-free radiance field methods under challenging scenarios. Using DF3DV-1K, we benchmark nine recent distractor-free radiance field methods and 3D Gaussian Splatting, identifying the most robust methods and the most challenging scenarios. Beyond benchmarking, we demonstrate an application of DF3DV-1K by fine-tuning a diffusion-based 2D enhancer to improve radiance field methods, achieving average improvements of 0.96 dB PSNR and 0.057 LPIPS on the held-out set (e.g., DF3DV-41) and the On-the-go dataset. We hope DF3DV-1K facilitates the development of distractor-free vision and promotes progress beyond scene-specific approaches. The dataset and leaderboard are available at https://johnnylu305.github.io/df3dv1k_web/.
We propose Self-Augmented Residual 3D Gaussian Splatting (SA-ResGS), a novel framework to stabilize uncertainty quantification and enhancing uncertainty-aware supervision in next-best-view (NBV) selection for active scene reconstruction. SA-ResGS improves both the reliability of uncertainty estimates and their effectiveness for supervision by generating Self-Augmented point clouds (SA-Points) via triangulation between a training view and a rasterized extrapolated view, enabling efficient scene coverage estimation. While improving scene coverage through physically guided view selection, SA-ResGS also addresses the challenge of under-supervised Gaussians, exacerbated by sparse and wide-baseline views, by introducing the first residual learning strategy tailored for 3D Gaussian Splatting. This targeted supervision enhances gradient flow in high-uncertainty Gaussians by combining uncertainty-driven filtering with dropout- and hard-negative-mining-inspired sampling. Our contributions are threefold: (1) a physically grounded view selection strategy that promotes efficient and uniform scene coverage; (2) an uncertainty-aware residual supervision scheme that amplifies learning signals for weakly contributing Gaussians, improving training stability and uncertainty estimation across scenes with diverse camera distributions; (3) an implicit unbiasing of uncertainty quantification as a consequence of constrained view selection and residual supervision, which together mitigate conflicting effects of wide-baseline exploration and sparse-view ambiguity in NBV planning. Experiments on active view selection demonstrate that SA-ResGS outperforms state-of-the-art baselines in both reconstruction quality and view selection robustness.
Removing unwanted objects from reconstructed 3D scenes is an important task in computer vision, supporting applications in AR/VR, robotics, and digital content creation. Existing methods typically complete the entire masked region in a single step and without effectively utilizing semantic information from other views, leading to difficulties in handling complex geometric details and textures. In this work, we propose a novel framework that integrates Semantic-guided Block Matching (SBM) and Region-Wise Progressive Refinement (RPR) for high-quality 3D object removal. First, we leverage DINOv2 to encode semantic guidance from multi-view observations, and the best match tokens are decoded to complete missing regions in the target view while maintaining cross-view consistency. Second, we introduce a RPR strategy that segments the target mask into multiple subregions and selectively refines those with poor visual quality. Our method is built upon Gaussian Splatting, ensuring high-fidelity scene reconstruction with efficient computation. Experimental results demonstrate that our approach outperforms existing Gaussian-based methods in terms of perceptual quality and coherence in 3D object removal.
We present a real-time LiDAR-based framework for Gaussian Splatting SLAM that tightly couples fast G-ICP registration with spherical rasterization-based dense mapping for large-scale sequences. Leveraging LiDAR geometry rather than appearance, we reuse tracking-estimated local covariances to initialize Gaussians with range-aware scales and to derive surface normals for geometry-aware map optimization. We further introduce a covariance-derived geometry score that measures local complexity and drives pruning in planar regions and selective densification in structurally rich areas, while optimized Gaussians and LiDAR-specific confidence cues are fed back to improve tracking robustness. On the Newer College dataset, our method achieves an F-score of 86.78\% using purely online trajectories at real-time speed ($>$20 FPS), and additional experiments on other datasets confirm its stability and scalability.
3D Gaussian Splatting (3DGS) has achieved remarkable success in real-time novel view synthesis, yet it suffers from severe overfitting under sparse-view settings due to insufficient geometric constraints. While recent methods introduce monocular depth priors to mitigate this, they inherently struggle with scale ambiguity and cross-view inconsistency, leading to defective geometry. In this paper, we propose StereoGS, a novel sparse-view 3DGS framework that integrates stereo priors to establish reliable binocular consistency. Unlike scale-agnostic monocular constraints, StereoGS introduces a Stereo Depth Regularization by constructing virtual stereo pairs during optimization and leveraging a foundation stereo model to enforce absolute scale and binocular-consistent structures. To further suppress overfitting and eliminate redundant primitives, we design a Gradient-Aware Opacity Decay strategy that dynamically penalizes Gaussians based on their relative opacity gradient magnitudes. Combined with a Consistency-Aware Dense Initialization using zero-shot multi-view depth estimation, StereoGS effectively anchors primitives to accurate scene surfaces. Extensive experiments on LLFF, DTU, Mip-NeRF360, and Blender datasets demonstrate that StereoGS achieves state-of-the-art performance in sparse-view settings without incurring any additional inference overhead. Project Page: https://stringerywh00.github.io/StereoGS_project_page/
Close-up rendering, zooming into a scene well beyond any training camera, is important for virtual production and interactive 3D content, yet remains an open challenge. 3D Gaussian splatting (3DGS) enables high-fidelity, real-time novel view synthesis, but its rendering quality degrades at close range. Recent diffusion-based methods that enhance the rendering by conditioning on reference images from the training set produce significant artifacts in this setting. We analyze this failure and identify its root cause: the scale gap between the close-up and reference views. We show that the features in reference-conditioned enhancement models are not scale-invariant, causing cross-view attention to retrieve incorrect correspondences when the same content appears at different scales, and that this mismatch cannot be corrected in latent space because the VAE encoder is not scale-equivariant. Building on this analysis we introduce MACRO, Multi-plane Attention for Closeup Render Optimization, a training-free method for high-quality close-up novel view synthesis from 3DGS. MACRO resolves the scale gap by leveraging the scene's known 3D structure: it decomposes the close-up into depth planes, crops and resizes references in image space to match the scale of each plane before encoding, and applies a depth-aware attention mask so each token attends only to scale-matched references. The method requires no architectural changes or additional training. We further contribute two new close-up novel view synthesis benchmarks, the first standardized evaluation protocol for this setting, and demonstrate state-of-the-art results on both, outperforming existing 3DGS and diffusion-based methods on both reconstruction and perceptual metrics. Project page: https://nitzanhod.github.io/MACRO
Reconstructing high-fidelity 3D building models from UAV imagery is essential for large-scale digital twin development. However, existing 3D Gaussian Splatting (3DGS) techniques often struggle with building facades, failing to capture sharp geometric transitions. To address this, we propose a semantic edge regularization framework that supervises 3DGS to produce crisp architectural boundaries. Our method leverages SAM 3 to generate precise building masks, from which we extract architecturally significant edges. During training, we align rendered image gradients with these extracted edges, forcing the Gaussians to converge into sharp structural geometries. Evaluations across campus environments, dense urban centers, and custom residential datasets demonstrate significant improvements in edge fidelity without requiring architectural modifications to the 3DGS pipeline. Our approach proves robust across diverse building types, roof geometries, and urban densities.
We address the inverse problem of blind 3D scene reconstruction from extremely motion-blurred images, a scenario where traditional Structure-from-Motion (SfM) pipelines fail. Existing approaches typically circumvent this bottleneck by relying on impractical sharp-image supervision. In this work, we introduce PRISM3D, a unified framework enabling robust reconstruction directly from severely degraded inputs. To overcome the lack of a reliable starting point, we propose a Robust Initialization strategy utilizing deep dense tracking method (VGGSfM) to recover global topology where feature matching fails. To the best of our knowledge, we are the first to effectively leverage this paradigm to bootstrap 3D Gaussian Splatting from extreme motion blur. However, while robust, this initialization yields sparse and noisy geometry that causes deterministic optimization to diverge. To resolve this, we propose a coupled solution driven by probability and physics: we adopt a probabilistic formulation for geometric densification via Markov Chain Monte Carlo (MCMC) to robustly populate the sparse priors, while simultaneously modeling physical image formation via continuous Bezier Trajectories. Furthermore, while PRISM3D establishes a highly robust standalone pipeline, the availability of complementary event streams offers an opportunity to push the reconstruction fidelity further. To exploit this, we introduce PRISM3D-E, a multi-modal (RGB + Events) extension that seamlessly integrates high-temporal-resolution events as structural priors to maximize geometric recovery. Because existing datasets lack paired event streams under such severe degradation, we concurrently contribute the PRISM3D-E Benchmark to facilitate rigorous evaluation. Extensive experiments demonstrate that both our standalone RGB framework and its multi-modal extension establish new state-of-the-art performance.
Lifelong scene mapping under rigid object rearrangement remains a fundamental challenge in robotics. While 3D Gaussian Splatting (3DGS) enables high-fidelity modeling, primitive-level updates often cause persistent ghosting and slow recovery. We propose CubifyGS, an object-level mapping framework that shifts dynamic maintenance from passive re-optimization to active asset management. CubifyGS models movable instances as reusable Gaussian assets, detects object appearance and disappearance, and updates maps through asset retrieval, rigid transformation, and explicit pruning rather than reconstruction from scratch. To address geometric voids and local photometric mismatch after such edits, we further propose an event-triggered adaptive optimization strategy that focuses computation on affected regions. We validate our approach on a newly constructed high-fidelity dynamic benchmark, demonstrating that CubifyGS improves artifact suppression and maintenance efficiency over representative reproducible baselines in the evaluated object-rearrangement setting.
Multi-view 3D surface reconstruction is a longstanding challenge in computer vision. Although recent large-scale reconstruction methods based on 3D Gaussian Splatting (3DGS) achieve impressive novel-view synthesis, producing high-quality surfaces over large scenes remains difficult, due to complex geometry, long optimization, and limited memory. In this paper, we propose a novel yet simple partitioning method to efficiently and faithfully reconstruct large-scale scene surfaces. Our key insight lies in a scene partitioning method based on viewpoint orientation. This partitioning approach ensures that views with similar orientations are jointly involved for more accurate depth estimations, leading to precise surface reconstructions and balanced computation on multiple GPUs in parallel. In addition, we propose a strategy to detect and repair missing regions in the initial point cloud caused by sparse viewpoints or insufficient textures, thereby further improving the geometric quality. Extensive experiments on the GauU-Scene, MatrixCity, and UrbanScene3D datasets demonstrate that our method outperforms the state-of-the-art approaches in surface reconstruction for large-scale scenes. Project page: https://hanl2010.github.io/VOP-GS.
3D reconstruction from sparse views is a challenging task in 3D computer vision. Recent studies on 3D Gaussian Splatting (3DGS) have achieved remarkable results with sparse views in novel view synthesis, yet reconstructing high-quality geometric surfaces from sparse views remains a challenge, due to the limited geometry clues and the discreteness of Gaussians. In this paper, we propose a novel 3DGS-based method for high-fidelity surface reconstruction from sparse views. Our key insight is to introduce a normal-guided depth propagation approach, which can extend depth information from high-confidence regions to constrain the depth in low-confidence areas. Additionally, we propose an abnormal depth edge-aware regularization to address depth discontinuities caused by the discreteness of Gaussians. Extensive experiments on DTU and Tanks-and-Temples datasets demonstrate that our method outperforms the state-of-the-art methods in sparse view surface reconstruction. Project page: https://hanl2010.github.io/DP-GS.
Recent advances in 3D content generation from text or images have achieved impressive results, yet view inconsistency from 2D generators and the scarcity of high-quality 3D data remain significant bottlenecks. Existing solutions typically adapt large-scale pre-trained text-to-image latent diffusion models to generate 3D Gaussian Splats (3DGS). However, these approaches often rely on training complex cascade pipelines that are computationally expensive and scalability-limited. Most critically, the quality of generated 3D assets is inherently constrained by each component capacity and compressed latent space, leading to decoding artifacts and accumulated errors. To address these limitations, we propose PixGS, a single-stage pipeline for direct high-quality 3DGS generation, which leverages recent advances in pixel-space diffusion to bypass lossy latent compression while still benefiting from the vast 2D generative priors. By directly denoising 3D Gaussian attributes at each timestep, our method enables precise, splat-level regularization of both appearance and geometry. Furthermore, we introduce a comprehensive supervision strategy that incorporates surface normals, depth, and high-frequency structural information, which is often overlooked in prior works. Experiments demonstrate that PixGS outperforms current state-of-the-art methods while maintaining a fast inference speed (1s on a single A100 GPU), offering a robust and efficient alternative to multi-stage generation pipelines.
3D Gaussian Splatting (3DGS) has revolutionized novel-view synthesis with its fast and high-fidelity rendering. However, rendering at high FPS and low latency across various scenes remains a challenge, especially when large amounts of 3D Gaussian ellipsoids appear in the scene. To address this issue, we introduce TemporalGS, to the best of our knowledge, the first training-free plug-and-play algorithmic approach to accelerate 3DGS rendering without any post-training or post-processing, implemented on top of tile-based software rasterization. The key idea is that, instead of rendering frames independently as 3DGS, we leverage the temporal priors, represented by novel geometry and appearance buffers, etc., to reduce redundancy of Gaussian preprocessing, sorting, and rasterization operations of consecutive frames. Specifically, we propose two acceleration strategies: (1) temporal dynamic culling, which filters out Gaussians that contribute less to current frame rendering; (2) selective rendering, which renders only a small portion of tiles that cannot be approximated by the temporal priors. By adapting and interleaving these two strategies, TemporalGS yields a simple but effective plug-and-play solution for 3DGS rendering speed-up without any training. Extensive experiments show that TemporalGS achieves comparable or even better performance compared to existing state-of-the-art post-training or post-processing-based 3DGS rendering acceleration approaches. TemporalGS can significantly enhance the rendering speed of various 3DGS methods, achieving up to $1.48\times$ acceleration, while maintaining competitive rendering quality. We further extend our TemporalGS to hardware rasterization-based 3DGS to show the portability of our algorithm.
Novel view synthesis has recently been revolutionized by 3D Gaussian Splatting (3DGS), which enables real-time rendering through explicit primitive rasterization. However, existing methods tie visual fidelity strictly to the number of primitives: quality downscaling is achieved only through pruning primitives. We propose the first inherently scalable primitive for radiance field rendering. Fourier Splatting employs scalable primitives with arbitrary closed shapes obtained by parameterizing planar surfels with Fourier encoded descriptors. This formulation allows a single trained model to be rendered at varying levels of detail simply by truncating Fourier coefficients at runtime. To facilitate stable optimization, we employ a straight-through estimator for gradient extension beyond the primitive boundary, and introduce HYDRA, a densification strategy that decomposes complex primitives into simpler constituents within the MCMC framework. Our method achieves state-of-the-art rendering quality among planar-primitive frameworks and comparable perceptual metrics compared to leading volumetric representations on standard benchmarks, providing a versatile solution for bandwidth-constrained high-fidelity rendering.
This paper introduces a fast method for high-quality 3D Gaussian Splatting (3DGS) reconstruction without traditional Structure-from-Motion (SfM). The proposed approach leverages 3D Foundation Models (3DFMs) for camera pose and point-cloud initialization, then jointly optimizes both camera poses and Gaussian primitives using a depth-guided loss function. This enables fast convergence even from rough initialization with as few as 50-60 input views. To further improve reconstruction quality in sparse-view scenarios, an MLP-based pose refinement module is introduced alongside depth-guided supervision from the foundation model. Extensive experiments on Mip-NeRF 360, Tanks and Temples, and RobustNeRF demonstrate that the proposed method achieves competitive reconstruction quality (23.61 dB PSNR, 0.19 LPIPS) while reducing training time to approximately three minutes per scene. The proposed method produces ready-to-use 3DGS models at a fraction of the time required by existing pipelines, making it suitable for near real-time applications in robotics, VR, and autonomous navigation.
Existing UAV vision-language navigation (VLN) benchmarks have enabled language-guided flight, but they largely focus on long, step-wise route descriptions with goal-centric evaluation, making them less diagnostic for real operations where brief, high-level commands must be grounded into safe multi-stage behaviors. We present HUGE-Bench, a benchmark for High-Level UAV Vision-Language-Action (HL-VLA) tasks that tests whether an agent can interpret concise language and execute complex, process-oriented trajectories with safety awareness. HUGE-Bench comprises 4 real-world digital twin scenes, 8 high-level tasks, and 2.56M meters of trajectories, and is built on an aligned 3D Gaussian Splatting (3DGS)-Mesh representation that combines photorealistic rendering with collision-capable geometry for scalable generation and collision-aware evaluation. We introduce process-oriented and collision-aware metrics to assess process fidelity, terminal accuracy, and safety. Experiments on representative state-of-the-art VLA models reveal significant gaps in high-level semantic completion and safe execution, highlighting HUGE-Bench as a diagnostic testbed for high-level UAV autonomy.
3D Gaussian Splatting (3DGS) has emerged as a powerful representation for high-fidelity rendering. However, existing assets often suffer from quality bottlenecks such as missing details and texture noise. Prior attempts to enhance these assets via 2D image processing introduce multi-view inconsistencies and high computational costs. In this paper, we propose a novel 3D-native refinement paradigm named AnchorSplat. AnchorSplat is an end-to-end deep network operating directly on 3D structures, avoiding the expensive optimization overhead of traditional 3D-2D-3D pipelines. Crucially, AnchorSplat is a strictly source-free solution requiring no original multi-view images. Central to the proposed method is the Point Anchor Mechanism, which enforces geometric consistency via local offset constraints, mitigating ill-posed mapping and gradient confounding. Furthermore, AnchorSplat replaces iterative densification with a single-pass multiplication mechanism. To facilitate research, we construct 3DGS-SR, the first large-scale benchmark for this task. Experiments demonstrate state-of-the-art results on the 3DGS-SR dataset, with throughput up to $10^5$ times faster than optimization methods. Notably, AnchorSplat exhibits robust zero-shot generalization across diverse data distributions, including generative model outputs and real-world scans.
We propose Difix3D-W, a 3D novel sparse-view synthesis framework for unconstrained real-world scenarios that contain distractors, occlusion, and appearance variation. Unlike existing methods that primarily perform novel-view synthesis from a sparse set of constrained images without transient elements or leverage unconstrained dense image collections in real-world scenarios, our method utilize sparse unconstrained images, showing high-quality 3D rendering results. To do this, we introduce reference-guided view refinement with a redesigned one-step diffusion model using a transient mask and a reference image to mitigate artifacts in rendered views, enhancing the 3D representation in the Gaussian field. Furthermore, we address sparse regions in the Gaussian field leveraging sparsity-aware Gaussian replication strategy to amplify Gaussians in the sparse regions and alleviate deficient camera viewpoint issues. Finally, we utilize LoRA and regularization to maintain 3D multi-view consistency. Extensive experiments demonstrate that our method consistently outperforms existing methods. This advancement paves the way for realizing real-world scenarios without labor-intensive data acquisition.
Recent advances in 3D Gaussian Splatting (3DGS) have enabled significant progress in dense dynamic Simultaneous Localization And Mapping (SLAM). Prevailing methods typically discard predefined dynamic objects, ignoring that transiently static objects offer valuable geometric constraints for pose estimation. A recent work attempts to leverage this potential by employing per-pixel uncertainty maps to quantify the magnitude of motion. While this approach enables transiently static objects to enhance pose estimation, it erroneously integrates these objects into the static map, resulting in persistent artifacts. Moreover, its reliance on purely geometric information leads to ambiguous object boundaries in the uncertainty maps. To overcome these limitations, we present DL-SLAM, a monocular Gaussian Splatting SLAM system built upon a novel dual-level probabilistic framework. Our method computes dynamic probability maps by combining semantic and geometric information. These pixel-level probabilities are lifted to 3D and aggregated to derive an object-level dynamic probability for each instance. Object-level probability enables the categorical pruning of dynamic Gaussians, resulting in an artifact-free static map. The static map, in turn, provides a geometrically consistent guidance to refine the pixel-wise probabilities, enhancing their reliability. Experimental results demonstrate that DL-SLAM outperforms existing approaches, improving tracking accuracy by up to 13\% while generating high-fidelity semantic maps.
Implicit Neural Representations (INRs) approximate discrete data through continuous functions and are commonly used for encoding 2D images. Traditional image-based INRs employ neural networks to map pixel coordinates to RGB values, capturing shapes, colors, and textures within the network's weights. Recently, GaussianImage has been proposed as an alternative, using Gaussian functions instead of neural networks to achieve comparable quality and compression. Such a solution obtains a quality and compression ratio similar to classical INR models but does not allow image modification. In contrast, our work introduces a novel method, MiraGe, which uses mirror reflections to perceive 2D images in 3D space and employs flat-controlled Gaussians for precise 2D image editing. Our approach improves the rendering quality and allows realistic image modifications, including human-inspired perception of photos in the 3D world. Thanks to modeling images in 3D space, we obtain the illusion of 3D-based modification in 2D images. We also show that our Gaussian representation can be easily combined with a physics engine to produce physics-based modification of 2D images. Consequently, MiraGe allows for better quality than the standard approach and natural modification of 2D images
Generating a 3D dental volume from a single panoramic radiograph (PXR) could provide a low-radiation alternative to Cone-Beam Computed Tomography (CBCT), but the problem is highly underdetermined: panoramic acquisition integrates 3D attenuation along curved X-ray paths into a 2D image, leaving depth-resolved anatomy unobserved. Existing implicit and generative approaches often produce oversmoothed geometry or anatomically inconsistent hallucinations, lacking geometry-driven supervision and relying on smooth representations unable to precisely localize sharp anatomical boundaries. We propose X-Splat, the first Gaussian Splatting framework for generating CBCT-like 3D dental volumes from a single PXR. X-Splat uses the known panoramic acquisition geometry as a generation scaffold: learnable anisotropic Gaussian primitives are initialized along the X-ray paths that formed the input image and adjusted in a single feed-forward pass, constrained by Beer-Lambert reprojection and multi-view radiographic training supervision. A lightweight residual refiner adds dataset-level anatomical priors without overriding the geometry already resolved by the Gaussians. We train on synthetic PXR-CBCT pairs, enabling direct volumetric supervision without paired real scans. We further introduce segmentation-based geometry-aware metrics, providing the first evaluation of PXR-based generation over maxillofacial anatomy. X-Splat outperforms NeRF- and GAN-based baselines, recovering individual teeth, cortical boundaries, and alveolar structure, including the mandibular canal which prior methods fail to reconstruct. Code will be available at https://github.com/tomek1911/X-Splat
Realistic simulation is critical for applications ranging from robotics to animation. Learned simulators have emerged as a possibility to capture real world physics directly from video data, but very often require privileged information such as depth information, particle tracks and hand-engineered features to maintain spatial and temporal consistency. These strong inductive biases or ground truth 3D information help in domains where data is sparse but limit scalability and generalization in data rich regimes. To overcome the key limitations, we propose 3DGSim, a learned 3D simulator that directly learns physical interactions from multi-view RGB videos. 3DGSim unifies 3D scene reconstruction, particle dynamics prediction and video synthesis into an end-to-end trained framework. It adopts MVSplat to learn a latent particle-based representation of 3D scenes, a Point Transformer for particle dynamics, a Temporal Merging module for consistent temporal aggregation and Gaussian Splatting to produce novel view renderings. By jointly training inverse rendering and dynamics forecasting, 3DGSim embeds the physical properties into point-wise latent features. This enables the model to capture diverse physical behaviors, from rigid to elastic, cloth-like dynamics, and boundary conditions (e.g. fixed cloth corner), along with realistic lighting effects that also generalize to unseen multibody interactions and novel scene edits.
Gaussian Splatting has achieved significant improvements by incorporating warping-based techniques. However, such methods suffer from pixel-level inaccuracies due to uncertain geometry. This uncertainty leads to spatial misalignments in the warped images, which disrupt residual learning used in warping-based methods and fundamentally limit the gains of correction, particularly on thin structures and high-frequency details. Driven by our insight that useful visual cues are not lost but locally preserved under slight displacement, we propose Geometry-Aware Deformable Aggregation (GADA). This method introduces an iterative refinement module with deformable offsets to actively correct spatial misalignments and recover these displaced cues. Furthermore, to address the limitations of standard pipelines where visibility checks (i.e., thresholding) often discard valid pixels and multi-view warped image fusion relies on naive mean aggregation, our module is coupled with an implicit confidence weighting mechanism that selectively suppresses unreliable evidence. Consequently, our approach outperforms prior warping-based Gaussian Splatting, preserving high-frequency quality while achieving 2.13 times faster FPS.
Recent advances in 3D Gaussian Splatting (3DGS) have enabled significant progress in dense dynamic Simultaneous Localization And Mapping (SLAM). Prevailing methods typically discard predefined dynamic objects, ignoring that transiently static objects offer valuable geometric constraints for pose estimation. A recent work attempts to leverage this potential by employing per-pixel uncertainty maps to quantify the magnitude of motion. While this approach enables transiently static objects to enhance pose estimation, it erroneously integrates these objects into the static map, resulting in persistent artifacts. Moreover, its reliance on purely geometric information leads to ambiguous object boundaries in the uncertainty maps. To overcome these limitations, we present DL-SLAM, a monocular Gaussian Splatting SLAM system built upon a novel dual-level probabilistic framework. Our method computes dynamic probability maps by combining semantic and geometric information. These pixel-level probabilities are lifted to 3D and aggregated to derive an object-level dynamic probability for each instance. Object-level probability enables the categorical pruning of dynamic Gaussians, resulting in an artifact-free static map. The static map, in turn, provides a geometrically consistent guidance to refine the pixel-wise probabilities, enhancing their reliability. Experimental results demonstrate that DL-SLAM outperforms existing approaches, improving tracking accuracy by up to 13\% while generating high-fidelity semantic maps.
Recent advances in 3D content generation from text or images have achieved impressive results, yet view inconsistency from 2D generators and the scarcity of high-quality 3D data remain significant bottlenecks. Existing solutions typically adapt large-scale pre-trained text-to-image latent diffusion models to generate 3D Gaussian Splats (3DGS). However, these approaches often rely on training complex cascade pipelines that are computationally expensive and scalability-limited. Most critically, the quality of generated 3D assets is inherently constrained by each component capacity and compressed latent space, leading to decoding artifacts and accumulated errors. To address these limitations, we propose PixGS, a single-stage pipeline for direct high-quality 3DGS generation, which leverages recent advances in pixel-space diffusion to bypass lossy latent compression while still benefiting from the vast 2D generative priors. By directly denoising 3D Gaussian attributes at each timestep, our method enables precise, splat-level regularization of both appearance and geometry. Furthermore, we introduce a comprehensive supervision strategy that incorporates surface normals, depth, and high-frequency structural information, which is often overlooked in prior works. Experiments demonstrate that PixGS outperforms current state-of-the-art methods while maintaining a fast inference speed (1s on a single A100 GPU), offering a robust and efficient alternative to multi-stage generation pipelines.
3D plant phenotyping is notoriously known to be procedure-complicated and of low throughput due to the extensive multi-view imaging, the fragile 3D reconstruction pipeline, and the additional cost from reconstructed geometry to phenotypic extraction. These limitations are further amplified in low-cost data acquisition, where smartphone videos or sparsely sampled multi-view images provide limited view overlap and self-occlusion. In this work, we show that the conventional 3D plant phenotyping pipeline could be streamlined and significantly accelerated with 3D Foundation Models (3DFMs), and particularly, present one of the first cross-crop 3D phenotyping frameworks powered by 3DFMs. The framework replaces COLMAP-style sparse initialization with 3DFM-based feed-forward geometric recovery, combines geometry-constrained 3D Gaussian Splatting for dense reconstruction, enables few-view reconstruction through iterative view synthesis and refinement, and converts reconstructed geometry into measurable organs through 2D-to-3D semantic transfer, metric scale recovery, and organ instance separation. We further construct a cross-crop dataset with smartphone-based image acquisition, diverse plant morphologies, and manual annotations for segmentation and phenotypic evaluation. Experiments across 26 plant sequences show that 3D Foundation Models reduce the average reconstruction time from 6.52 minutes to 1.58 seconds while maintaining high reconstruction quality and phenotyping accuracy. These results suggest a fresh technical route for high-throughput 3D plant phenotyping, from low-cost image acquisition to fast reconstruction, perception, scale recovery, and phenotypic measurement.
Reliable instance-level scene understanding is a fundamental prerequisite for object-level interactions and high-fidelity 3D representations. While current methods often leverage 2D foundation segmentation models to obtain these priors, their 2D-centric design typically yields fragmented masks and inconsistent predictions across different views. To address these issues, we propose a novel framework that produces consistent 2D instance masks to guide the optimization of 3D Gaussian Splatting (3DGS) feature fields. Our framework consists of three main stages. (1) Multi-Cue Extraction that generates synergistic semantic, geometric, and structural priors from input images. (2) Multi-Cue-Guided Mask Merging process that consolidates fragmented masks using a composite merge score derived from semantic, depth, and edge cues. (3) Cross-View Mask Matching that establishes globally consistent identity assignments across all viewpoints. By transforming viewpoint-specific segments into coherent 3D primitives, our approach enables stable 3D instance segmentation and effective downstream editing tasks. Experiments demonstrate that our method significantly improves cross-view consistency and segmentation stability over existing baselines while maintaining high-fidelity photometric reconstruction.
3D Gaussian Splatting has demonstrated remarkable potential in novel view synthesis. In contrast to small-scale scenes, large-scale scenes inevitably contain sparsely observed regions with excessively sparse initial points. In this case, supervising Gaussians initialized from low-frequency sparse points with high-frequency images often induces uncontrolled densification and redundant primitives, degrading both efficiency and quality. Intuitively, this issue can be mitigated with scheduling strategies, which can be categorized into two paradigms: modulating target signal frequency via densification and modulating sampling frequency via image resolution. However, previous scheduling strategies are primarily hardcoded, failing to perceive the convergence behavior of scene frequency. To address this, we reframe the scene reconstruction problem from the perspective of signal structure recovery and propose SIG, a novel scheduler that synchronizes image supervision with Gaussian frequencies. Specifically, we derive the average sampling frequency and bandwidth of 3D representations, and then regulate the training image resolution and the Gaussian densification process based on scene frequency convergence. Furthermore, we introduce Sphere-Constrained Gaussians, which leverage the spatial prior of initialized point clouds to control Gaussian optimization. Our framework enables frequency-consistent, geometry-aware, and floater-free training, achieving state-of-the-art performance by a substantial margin in both efficiency and rendering quality in large-scale scenes. The code is available at: https://github.com/weiyixue999/Signal_Structure_Aware_Gaussian
Interactive segmentation of 3D Gaussians offers a compelling opportunity for real-time manipulation of 3D scenes, thanks to the real-time rendering capability of 3D Gaussian Splatting (3DGS). However, existing methods require a time-consuming per-scene setup - typically tens of seconds or even minutes - before interactive segmentation can begin on a raw 3DGS scene. This setup involves multi-view mask preparation, mask lifting, and feature distillation, creating a major bottleneck for online applications. To address this limitation, we aim to completely eliminate the setup stage for interactive 3DGS segmentation while keeping the segmentation time practical (under 1 second). In this work, we present SAGO (Segment Any Gaussians Online), a novel setup-free framework for interactive 3DGS segmentation. By introducing virtual drones, our method reframes the 3D segmentation problem as an online Next-Best-View (NBV) planning task formulated within a Markov process. Extensive experiments demonstrate that SAGO can extract clean 3D assets directly from 3D Gaussians with sub-second latency, thereby enabling a broad range of downstream applications such as object manipulation and scene editing. Moreover, our method achieves over a 50x speedup compared to the previous setup-free 3DGS segmentation frameworks.
3D Gaussian Splatting (3DGS) enables real-time novel view synthesis for static scenes. Extending it to dynamic scenes via deformation fields has recently attracted significant attention, particularly for dynamic scene reconstructionband distractor-free. However, existing deformation networks lack explicit motion awareness: they neither capture long-term motion intensity nor exploit short-term temporal coherence, leading to inaccurate foreground deformation and pseudo-static residuals in the background. We present MVFusion-GS, a method that enhances deformation networks with two complementary motion-aware mechanisms. The Motion-Variance Guided Refinement aggregates per-Gaussian deformation statistics across time to estimate motion variance and uses it to guide dynamic-static separation during deformation prediction. The MotionFormer Temporal Attention module applies Transformer self-attention over neighboring timesteps to model local motion dependencies and improve temporal consistency. Extensive experiments on both dynamic scene reconstruction and distractor-free reconstruction benchmarks demonstrate state-of-the-art performance, showing that explicit motion awareness improves both foreground motion modeling and static background reconstruction.
Standard MipNeRF360-style 3D Gaussian Splatting (3DGS) evaluation holds out every N-th frame -- but these frames have trained neighbors on both sides, so the metric measures near-trajectory interpolation rather than spatial generalization. We introduce a fair matched-count protocol that isolates this effect: both arms train on the same number of images and differ only in whether the holdout is spread evenly (interpolation) or forms a contiguous spatial sector (extrapolation). Our primary finding is a large, consistent interpolation-extrapolation gap of 3~12dB -- several times the differences typically reported between competing methods. The gap is robust to training noise, is in two cases large enough to flip a method ranking under multi-seed confirmation, and -- crucially -- persists across three representation families, including a non-Gaussian volumetric neural radiance field (NeRF), so it reflects spatial coverage rather than any one representation. Diagnostically, it is dominated by a diffuse/geometry-proxy component and tracks each view's angular distance to its nearest training view, a zero-cost signal that also guides capture planning; loss-side regularization yields only marginal gains. Standard holdouts remain useful for near-trajectory rendering but should not, alone, be read as evidence of spatial generalization. Prior work notes protocol sensitivity; ours is, to our knowledge, the first to combine matched-count paired holdout, cross-representation quantification, and a diagnostic analysis Table 1. We describe a spatial-holdout benchmark toolkit with standardized splits and baselines for 16 scenes, which we are preparing for public release.
3D Gaussian Splatting (3DGS) enables high-quality real-time novel-view synthesis, but practical scenes often contain millions of Gaussians, making compression essential for deployment on limited hardware. Existing reduction methods are effective but mostly heuristic: they provide no multiplicative approximation guarantee for the rendered objective, and thus rely heavily on costly post-pruning finetuning to recover quality. We ask a basic question: can a 3DGS scene be provably replaced by a much smaller weighted subset (coreset) while preserving the objective of interest? We first show that, in the unrestricted setting, no non-trivial multiplicative 3DGS coreset exists. We then show that multiplicative guarantees are not impossible, but resolution-dependent. For a prescribed rendering resolution, such as representative views or grids of views/rays, we provide the first weighted coreset construction theorem for 3DGS. The construction samples Gaussians by sensitivity: provable importance scores measuring each Gaussian's role in the full-scene objective. Finally, under explicit validity and log-transmittance stability assumptions, we turn this objective guarantee into a rendering guarantee. Empirically, our method is strongest where deployment needs it most: aggressive compression with no or minimal recovery compute. In prune-only and very short finetuning regimes, it achieves state-of-the-art performance, showing that principled importance estimation can be both theoretically meaningful and practically useful. Open-source code is available at https://github.com/waseem-m/3dgs_provable_coresets.
Arbitrary-Scale Super-Resolution (ASR) reconstructs images at continuous magnification factors. Recent methods accelerate inference by replacing computationally heavy implicit neural decoders with explicit 2D Gaussian Splatting (GS). However, since standard Gaussians are smooth low-pass primitives, modeling edges and fine textures requires multiple overlapping, well-aligned splats, which creates severe bottlenecks during rasterization. To address this, we introduce Resonant Brane Splatting (RBS), a feed-forward ASR framework. RBS replaces flat Gaussians with Branes: expressive primitives that emit spatially varying colors to natively model local contrast and complex textures within a single footprint. We achieve this by augmenting the standard Gaussian envelope with internal Gaussian-Hermite modes, assigning a distinct color coefficient to each. The zero-order mode recovers standard GS, while higher-order modes capture high frequencies. We predict Brane parameters directly from low-resolution features. Because Branes provide a mathematically richer formulation than simple Gaussians, far fewer primitives need to overlap to reconstruct a given target pixel. To exploit this, we introduce an efficient fully differentiable rasterizer with a precise culling strategy based on the classical quantum turning point. This allows us to safely skip negligible regions, drastically reducing the rendering overhead. Experiments on standard ASR benchmarks show that RBS improves reconstruction quality over implicit and GS baselines, while achieving superior speed-quality trade-off than prior GS methods.
Fast quadrotor flight requires safe obstacle avoidance under tight onboard compute limits. While 3D Gaussian Splatting (3DGS) provides a continuous, geometry-aware scene representation for perception-driven navigation, existing 3DGS safety filters use reduced-order models such as single- and double-integrators that ignore actuator limits and assume commanded accelerations are realized instantaneously. Building on an analytic collision cone barrier for 3DGS, we introduce a nonlinear, actuator-aware safety filter enforced through the full quadrotor dynamics. We derive a high-relative-degree collision cone exponential CBF and a backup CBF that preserves QP feasibility under input constraints using a forward-simulated backup policy. Compared with a state-of-the-art 3DGS safety filter, our approach reduces trajectory jerk by 47% and runs 2.25 times faster. We validate the method in simulation and on hardware for real-time navigation in cluttered, perception-derived environments.
Audio-driven talking head synthesis has achieved impressive progress in lip synchronization and visual quality, yet generating expressive emotional avatars with controllable intensity remains challenging, especially under real-time constraints. In this paper, we present GaussianEmoTalker, an audio-driven framework for real-time emotional talking head synthesis based on 3D Gaussian Splatting. Instead of directly predicting the final emotional avatar from speech, we formulate emotional animation as a neutral-to-emotional residual deformation problem. GaussianEmoTalker first constructs an identity-specific neutral talking space with GaussianBlendshapes, which provides high-fidelity Gaussian attributes and phoneme-synchronized neutral motion. It then predicts an emotion-conditioned residual deformation by combining mesh displacement cues, audio features, emotion categories, and intensity encodings. To fuse these heterogeneous signals, we introduce a spatial-audio-emotion attention module that estimates the offsets of Gaussian attributes for expressive and temporally stable rendering. Extensive experiments demonstrate that GaussianEmoTalker achieves competitive video quality, accurate lip synchronization, controllable emotional expression, and real-time rendering compared with recent emotional talking head methods. Our project page is available at https://njust-yang.github.io/GaussianEmoTalker.github.io/
Recent advances in neural rendering have established 3D Gaussian Splatting (3DGS) as a highly efficient representation for novel view synthesis, enabling fast training and real-time rendering with strong fidelity. However, when supervision is limited to sparse input views, 3DGS tends to overfit to the observed images and generalize poorly to unseen viewpoints. We address this challenge from the perspective of flat minima (FM) optimization, which seeks solutions that remain stable under small parameter perturbations. Viewing Gaussian parameters as trainable weights, we adapt FM principles to the geometric and dynamic nature of 3DGS with a lightweight training framework. Our method regularizes optimization with controlled Gaussian perturbations that account for each Gaussian's anisotropy and the training progress, preserving fine details while improving robustness to sparse-view overfitting. To further stabilize this flat minima optimization process, we introduce periodic reinitialization, which temporarily returns non-positional parameters to their initial states for a short window. Together, these techniques integrate seamlessly into existing 3DGS pipelines without architectural changes. Experiments on LLFF and Mip-NeRF360 datasets demonstrate improved quantitative metrics and perceptual quality under sparse-view supervision, producing reconstructions that are sharper, more stable, and better generalized to novel viewpoints.
3D Gaussian Splatting (3DGS) has emerged as a powerful representation for high-fidelity rendering. However, existing assets often suffer from quality bottlenecks such as missing details and texture noise. Prior attempts to enhance these assets via 2D image processing introduce multi-view inconsistencies and high computational costs. In this paper, we propose a novel 3D-native refinement paradigm named AnchorSplat. AnchorSplat is an end-to-end deep network operating directly on 3D structures, avoiding the expensive optimization overhead of traditional 3D-2D-3D pipelines. Crucially, AnchorSplat is a strictly source-free solution requiring no original multi-view images. Central to the proposed method is the Point Anchor Mechanism, which enforces geometric consistency via local offset constraints, mitigating ill-posed mapping and gradient confounding. Furthermore, AnchorSplat replaces iterative densification with a single-pass multiplication mechanism. To facilitate research, we construct 3DGS-SR, the first large-scale benchmark for this task. Experiments demonstrate state-of-the-art results on the 3DGS-SR dataset, with throughput up to $10^5$ times faster than optimization methods. Notably, AnchorSplat exhibits robust zero-shot generalization across diverse data distributions, including generative model outputs and real-world scans.
3D Gaussian Splatting (3DGS) achieves real-time novel-view synthesis by optimizing millions of anisotropic Gaussians, yet its training remains expensive, with the backward pass dominating runtime in the post-densification refinement phase. We observe substantial update redundancy in this phase: many sampled views have near-plateaued losses and provide diminishing gradient benefits, but standard training still runs full backpropagation. We propose SkipGS with a novel view-adaptive backward gating mechanism for efficient post-densification training. SkipGS always performs the forward pass to update per-view loss statistics, and selectively skips backward passes when the sampled view's loss is consistent with its recent per-view baseline, while enforcing a minimum backward budget for stable optimization. On Mip-NeRF 360, compared to 3DGS, SkipGS reduces end-to-end training time by 23.1%, driven by a 42.0% reduction in post-densification time, with comparable reconstruction quality. Because it only changes when to backpropagate without modifying the renderer, representation, or loss, SkipGS is plug-and-play and compatible with other complementary efficiency strategies, enabling additive speedups. Code is available at https://github.com/ASU-ESIC-FAN-Lab/SkipGS.
Robots deployed in unstructured outdoor environments often plan from scene reconstructions collected before deployment because operators cannot remap large or remote sites before every mission. As a result, robots must make long-horizon planning decisions using stale maps that assume the terrain remains unchanged, even though physical changes to the environment may render previously feasible routes unsafe or unreachable at execution time. We present a physically viable world model for evaluating what-if queries for robot navigation under future terrain change. The system augments reconstructed 3D Gaussian splat scenes with physics-based simulation to generate physically modified versions of the same environment without recollecting sensor data or rebuilding the map. We then implement a terrain-aware planner that accounts for physical events, obstacles, and deformations that are simulated by the world model. This allows robots and human operators to evaluate whether planned routes remain feasible before committing to a planned route, particularly in constrained environments where retreat or recovery may become impossible once conditions change. We evaluate the system on a real outdoor field site in Central Texas using simulated flooding across multiple severity levels. We measure route and mission feasibility as terrain conditions deteriorate under physically simulated interventions. Our results show that physically viable world models expose long-horizon route failures and rerouting behavior that are not apparent when planning only on the original reconstructed environment, allowing robots to evaluate how future terrain changes may affect route feasibility before deployment.
2D Gaussian Splatting has recently emerged as a significant method in 3D reconstruction, enabling novel view synthesis and geometry reconstruction simultaneously. While the well-known Gaussian kernel is broadly used, its lack of anisotropy and deformation ability leads to dim and vague edges at object silhouettes, limiting the reconstruction quality of current Gaussian splatting methods. To enhance the representation power, we draw inspiration from quantum physics and propose to use the Gaussian-Hermite kernel as the new primitive in Gaussian splatting. The new kernel takes a unified mathematical form and extends the Gaussian function, which serves as the zero-rank special case in the updated general formulation. Our experiments demonstrate that the proposed Gaussian-Hermite kernel achieves improved performance over traditional Gaussian Splatting kernels on both geometry reconstruction and novel-view synthesis tasks. Specifically, on the DTU dataset, our method yields more accurate geometry reconstruction, while on datasets such as MipNeRF360 and our customized Detail dataset, it achieves better results in novel-view synthesis. These results highlight the potential of the Gaussian-Hermite kernel for high-quality 3D reconstruction and rendering.
Recent progress in 4D Gaussian Splatting (4DGS) has achieved impressive dynamic scene reconstruction results. While these methods demonstrate remarkable performance, the specific factors behind their gains remain underexplored, making a systematic understanding of the underlying principles challenging. In this paper, we perform a comprehensive analysis of these hidden factors to provide a clearer perspective on the 4DGS framework. We first establish a controlled baseline, FreeTimeGS_ours, by formalizing and reproducing the heuristics of the state-of-the-art FreeTimeGS. Using this framework, we examine 4DGS along its fundamental axes and identify practical secrets, including the emergent temporal partitioning driven by Gaussian durations and the decoupling between photometric fidelity and motion behavior. Based on these insights, we propose FreeTimeGS++, a principled method that employs gated marginalization, UFM-guided initialization, and color correction to improve stability and reproducibility. Our approach yields reproducible results with reduced run-to-run variance.